HVAC / circulating pumps

CronoNorm-NLG is a baseplate pump with axial suction. This single-stage, horizontal spiral housing pump is used for a variety of clean, slightly contaminated , cold and hot water applications: pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes; for pumping cold

CronoTwin-DL is a glanded double pump of in-line design with a flange connection. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems: high-efficiency motors as standard; from 0.75 kW nominal motor power

VeroLine-IP-E is an electronically controlled glanded double pump in in-line design with flange connection and automatic power adjustment. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems: motors with

CronoBloc-BL is a glanded pump in block design with flange connection designed for pumping large quantities of hot and cold water, including high-rise building applications. Its low life cycle cost is the result of optimised hydraulic efficiencies combined with corrosion-resistant cataphoretic coatings, which ensure an economical and long service

The Wilo-Stratos GIGA2.0-I smart glanded pump is recommended for applications where large volumes of water have to be pumped to great delivery heads. The smart glanded pump in the in-line version offers many interfaces for multiple pump control, integration into building automation, operating data recording and modern options for mobile access via Wilo-Smart Connect

Glanded pump in in-line design with threaded connection or flange connection For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems high-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2

Stratos GIGA is a glanded, high-efficiency in-line pump with an EC motor and electronic duty adaptation. It is used for the pumping of heating water (acc. to VDI 2035), cold water and water / glycol mixtures without abrasive substances in heating, cold water and cooling systems. The GIGA version is a single-stage low-pressure centrifugal pump with

Axially split case pump for reliable operation and energy-efficient transport of large volume flows through extensive distribution networks. The Wilo-Atmos TERA-SCH axially split case pump provides a reliable water supply 365 days a year at low operating costs. The pump’s easy maintenance design and high efficiency across the entire characteristic

Yonos MAXO is a glandless circulation pump with threaded connection or flange connection, EC motor with automatic power adjustment. It is used in hot water heating, air conditioning, closed cooling circuits and industrial circulation systems. The Wilo-Connect module enables the optimal integration of the Wilo-Yonos MAXO into building management systems

Stratos PICO is a glandless circulation pump with a threaded connection, a blocking-current proof EC motor and integrated electronic performance control. It is used for all hot water heating systems, air conditioning applications, industrial circulation systems: very high degrees of efficiency due to ECM technology; high-efficiency pump especially

CronoNorm-NL is a single-stage, low-pressure centrifugal pump with an axial suction point, according to EN 733 and ISO 5199, mounted on a baseplate: pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes; pumping heating water in accordance with VDI 2035

VeroLine-IP-Z is a glanded circulation pump of in-line design with a threaded connection. It is a single-stage, low-pressure centrifugal pump. It is used for pumping potable water, cold and hot water (in accordance with VDI 2035) without abrasive substances, in heating, cold water and cooling water systems: high resistance to corrosive fluids due

Wilo-VeroLine-IPH-O is a glanded pump of in-line design with a flange connection. It is a single-stage, low-pressure centrifugal pump. It is used for pumping heat transfer oil in closed industrial circulation systems. Glanded pump in in-line design with flange connection. from 0.75 kW, motors equipped as standard with IE2 technology with higher

The BAC is a glanded pump in monobloc design with a plastic housing and either a screwed connection or Victaulic connection. It is used for pumping cooling water, cold water, water-glycol mixtures and other fluids without abrasive substances. This single-stage low-pressure centrifugal pump has an axial suction port and radially arranged pressure

CronoTwin-DL-E is an electronically controlled, glanded double pump of in-line design with a flange connection and automatic power adjustment. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

Centrum is a series of 2 to 3 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps with speed-controlled motors. Centrum pumps provide fully automatic water supply and pressure boosting in inlet mode from a tank, for domestic, commercial, industrial and municipal applications (eg residential, office

The Wilo-Stratos GIGA2.0-D is a high-efficiency in-line twin-head pump with EC motor and electronic power adjustment in glanded pump construction. Single-stage low-pressure centrifugal pump with flange connection and mechanical seal. Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive

Yonos PICO is a glandless circulation pump with a threaded connection, a blocking-current proof EC motor and integrated electronic power control. It is suitable for all hot water heating systems, air-conditioning applications, industrial circulation systems

VeroTwin-DP-E is an electronically controlled, glanded double pump of in-line design with a flange connection and automatic power adjustment. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems: motors with

Wilo-Stratos MAXO is designed for commercial HVAC and drinking water applications, and offers optimised energy-saving features combined with excellent user-friendliness for ease of operation. With optimised and innovative energy-saving features, the Wilo-Stratos MAXO sets new standards for commercial HVAC and drinking water applications in terms

VeroNorm-NPG is a single-stage low-pressure centrifugal pump. It is used for pumping heating water in accordance with VDI 2035 water/glycol mixtures, cooling/cold water and secondary hot water; as well as for applications in municipal water supply, irrigation, building services, general industry and power stations: suitable for temperatures up to

CronoLine-IL-E is an electronically controlled, glanded double pump with an in-line design, flange connection and automatic power adjustment. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems. This

CronoLine-IL is a glanded pump in in-line design with a flange connection. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems. This single-stage, low-pressure centrifugal pump features: mechanical seal

VeroTwin-DPL is a glanded, single-stage, low-pressure double pump of in-line design with a flange connection. It is used for pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems: high-efficiency motors as standard; from