Floor drainage

The BLÜCHER light duty 114.300.050 is an adjustable drain for concrete/tiled floors, with a horizontal 50mm outlet. It is a low-profile drain without a membrane flange. The upper part of the outlet is height-adjustable, can be rotated 360° and tilted at 10° to the lower part. Material: Stainless steel grade AISI 304 or AISI 316L. Sealing ring

The Industrial 200 is a circular stainless steel floor drain suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for flexible sheet floor finishes and is supplied without a membrane flange. A horizontal 110mm push fit spigot outlet is included. The

The AS701 stainless steel upstand channel drain is available in 304 and 316 grade stainless steel. It is ideally suited for areas where wall tanking is required, such as public shower areas, and it can be integrated with tiled walls. The AS701 stainless steel upstand channel drain is designed for use as part of a bespoke drainage solution

This circular stainless steel floor drain is suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for resin or epoxy coated floors. The drain has a vertical 110mm push-fit spigot outlet and can be supplied with a removable water trap and either a sand

The Industrial 200 is a square-topped stainless steel floor drain suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for tiled or concrete floor finishes. A vertical 110mm push fit spigot outlet is included. The drain can also be supplied with a

Industrial-grade 760.503.110 round-topped stainless steel floor drains are designed for use with resin or concrete floors. They are suitable for commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A vertical 110mm push-fit spigot outlet is included as standard. The drains can be

The AS201 mechanical clamp drainage channel is made from 304 or 316 grade stainless steel and is designed to be used as part of a bespoke drainage solution. The AS201 mechanical clamp drainage channel clamps most flexible floor materials (up to 8mm thick) and is typically used where ACO Vinyl Seal is not appropriate, for example, when a flexible

Light-duty 260.300.110 stainless steel drains are designed for flexible sheet flooring. They have a 110mm vertical outlet. The clamping ring is 155mm in diameter and is secured to the drain with six flexible sheet flooring bolts. Standard gratings are 155mm in diameter and 1mm thick, with a bright-annealed surface. They are secured to the clamping

Industrial-grade 763.403.110 square-topped stainless steel floor drains are designed for tiled or concrete floors. They are suitable for use in commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A horizontal 110mm push-fit spigot outlet is included as standard. The drains can be

The BLÜCHER light duty 150.300.110 is an adjustable drain for concrete/tiled floors, with a vertical 110mm outlet. The upper part of the outlet is height-adjustable, can be rotated 360° and tilted at 10° to the lower part. Material: stainless steel grade AISI 304 or AISI 316L. Sealing ring: EPDM rubber Weight: 1.3 kg. The drain comes with a square

HygienicPro® drainage channels and drains have been specifically designed for hygiene-sensitive applications, such as in food and beverage, and pharmaceutical manufacturing. The special geometry of the HygienicPro® drainage system allows emptying of the drain using the minimum amount of water, while leaving no standing water or waste deposit. The

Howe Green linear drainage system is used in changing rooms, shower areas, spas, commercial kitchens, laboratories, veterinary surgeries and other areas that require wash-down or water drainage: modular form with level or sloping channels, and a range of outlets and junctions; made to measure system to suit layout requirements; choice of gratings

Howe Green provides linear drainage solutions for applications such as changing rooms, shower areas, spas, commercial kitchens, laboratories, veterinary surgeries and other areas that require wash-down or water drainage. The HG200 Slot Drain is an unobtrusive linear drainage solution. It is popular for use in areas where aesthetics are a

Light duty 160.300.110 stainless steel drains are designed for concrete and tiled floors. They have a 110mm vertical outlet. The drains come with a 140x140x2mm square grating with screw fixings as standard. A choice of several other styles of removable grating are available on request. A removable, easy to clean water trap or multiwater trap can

The AS301 box channel drain has a standard profile and is available with a choice of grating options. It is designed to be used as part of a bespoke drainage solution. Manufactured from 304 or 316 grade stainless steel it is suitable for internal and external applications and can be interfaced with ACO Vinyl Seal. The AS301 stainless steel box

The BLÜCHER light duty 314.300.050 is an adjustable drain for concrete / tiled floors with a horizontal 50mm outlet. It is a low-profile drain with a membrane flange. The upper part of the outlet is height-adjustable, can be rotated 360° and tilted at 10° to the lower part. The membrane flange is also height adjustable. Material: stainless steel

Industrial-grade 763.503.110 round-topped stainless steel floor drains are designed for concrete or resin floors. They are suitable for use in commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A horizontal 110mm push-fit spigot outlet is included as standard. The drains can be

The Industrial 200 is a circular stainless steel floor drain suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for flexible sheet floor finishes and is supplied without a membrane flange. A vertical 110mm push fit spigot outlet is included. The drain

The TI-DRAIN floor drainage system is for use in tiled floors for precision surface drainage wherever floor coverings require additional standard-compliant floor drainage where exposed to wet conditions. Normal application areas include bathrooms and shower rooms, public toilets and changing rooms, laundry rooms, various types of workrooms and

Industrial-grade 760.403.110 square-topped stainless steel drains are designed for tiled or concrete floors. They are suitable for use in commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A vertical 110mm push-fit spigot outlet is included as standard and the drains can be supplied