Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Pumping stations
(116)
Pumping stations for moving wastewater, sewage and stormwater where gravity drainage is not possible. Packaged and modular systems with submersible pumps, wet wells, pipework, valves and control panels. Surface or below-ground installation for residential, commercial and municipal drainage. Foul and surface water transfer, flood alleviation, basement and site dewatering.
Pumping stations - helping you find the best solution for your project.
Dual V3 sump pump station
The Dual V3.1 groundwater sump pump is suitable for use where 1 or less inlet is required and space is limited. This packaged pump station is designed to collect ground water via a perimeter channel or 110mm pipes (129 detail) and / or clear opening to the top of the chamber: designed specifically for below ground applications; HDPE chamber; able
Delta Dual V3 - below-ground packaged sump pump station
Delta Dual V3 packaged pumping station is made from high-density polyethylene and designed to collect groundwater and surface water in basement and lightwell applications. Supplied with two submersible pumps and pre-assembled internal pipework, it is suitable for use with cavity drained systems and withstands high water table conditions
Delta Dual V6 - below-ground packaged sump pump station
Delta Dual V6 is a high-capacity packaged pump station made from high-density polyethylene (HDPE) for managing groundwater and surface water in demanding environments. Designed for use with the Delta Type C System, it handles water from areas over 150m² or basements with head heights up to 10m, and includes two submersible pumps set for primary- PRODUCT
Delta Membrane Systems
SDS Weholite Pumping Stations
Weholite Packaged Pumping Stations are manufactured and assembled off-site and are designed to meet project-specific requirements using a standard set of components. This improves site productivity, reduces installation time and construction materials, and provides major savings on programme costs. These systems are manufactured to varying depths
Single V3 below-ground packaged sump pump station
The Single V3 packaged pump station from DELTA® is designed to collect ground water from a cavity membrane system through the clear opening to the top of the chamber. Single V3 is for protection only and would be selected where no running water is present or expected: specifically designed for below ground applications; HDPE chamber - can
Basement drainage protection
Cavity Drain Systems generally require a collection sump + pump to manage the collection and discharge of ground and/or foul water. This automatically manages the evacuation of water ingress and requires mains power to operate. The Maxx product range includes the AlertMaxx2 is a high level water alarm and monitoring system which will alert a home- PRODUCT
Delta Membrane Systems
Delta Foul V3 - basement wastewater package pumping station
Delta Foul V3 package pumping station is made from tank-grade HDPE and designed to collect foul and grey water from basements, below ground structures and ground floor extensions. Supplied with a pre-assembled chamber, internal pipework and a submersible pump for automatic operation- PRODUCT
Delta Membrane Systems
Pumping station design, build & commissioning service
Colloide designs and builds high-quality pumping systems for pumping anything from pure water through to heavy slurries. Systems will have one or more pumps at the core, but with ancillary equipment designed into it. Variances include: various pump types such as submersible / dry well end suction / progressive cavity / vertical multistage etc
The AquaFlush 160 HT is a fully automatic, high-temperature, wastewater system suitable for pumping hot water containing particles to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste- PRODUCT
- Edincare Pumps
Sanisett 1 and 2 are single and twin pumping stations designed for the effective dewatering of buildings and areas below the sewer level. They are made in accordance with EN 12050-2. Sanisett is designed as a complete wastewater sump for above- or below-ground installation, and for use with ABS pumps from the Robusta, Coronada, Piranha and MF
Mono manufactures a range of packaged pump stations that transfer raw sewage from collection sumps to the main sewerage system, or for installation at remote or small treatment plants for sludge/sewage handling. Incorporating a Mono macerator or Muncher® with a Mono progressing cavity pump, flow is finely macerated to provide pump protection and- PRODUCT
- Mono Pumps
ABS Piranhamat 701-1002 double lifting stations are flood-proof and suitable for automatic sewage pumping from areas below the backwash level in accordance with EN 12050-1. It provides reliable and economical discharge of wastewater under pressure using small-diameter pipelines. It is suitable for new-build and refurbishment applications
The PowerFlush is a fully automatic macerator suitable for pumping waste from a bathroom to a higher level when gravity drainage is not possible or economical. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from toilets, basins, showers or bidets. The- PRODUCT
- Edincare Pumps
The PowerFlush (High Level Alarm) is a fully automatic macerator suitable for pumping waste from a bathroom to a higher level when gravity drainage is not possible or economical. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from toilets, basins- PRODUCT
- Edincare Pumps
Packaged pumping stations provide an efficient and economic way to install a drainage system. Constant Air Systems designs and manufactures a wide range of bespoke prefabricated plantrooms at CAS House in High Wycombe. Compared to the conventional alternative of a concrete well and separate pump system, a packaged system offers the potential for- PRODUCT
- Constant Air Systems
The AquaFlush is a fully automatic wastewater pumping system suitable for pumping grey water to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from sinks, washing machines or- PRODUCT
- Edincare Pumps
The Remota 90 is a fully automatic floor-mounted pumping station suitable for pumping waste from a bathroom to a higher level when gravity drainage is not possible or economical. The system is suitable for installation at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from toilets, basins- PRODUCT
- Edincare Pumps
The MagnaPro Vortex 2000 is a fully automatic pumping station specifically designed for pumping foul water or stormwater when gravity drainage is not possible or economical. The system is suitable for installation at the initial building stage or for retrofitting to existing buildings. It can accept waste from basements or entire houses. The- PRODUCT
- Edincare Pumps
Edincares technical sales team helps in any project design required, from small domestic wastewater units through to industrial/commercial stormwater and foul water packaged pumping stations. This not only gives customers the additional peace of mind that the correct pump system is being purchased, but also advises the customer as to the correct- PRODUCT
- Edincare Pumps
Klargester Commercial pumping stations are suitable for developments and premises where drainage by gravity is not an option. The range includes solutions for sewage treatment plants, surface water, rainwater harvesting and septic tanks. Tanks and pumps come in a range of sizes and dimensions, offering complete flexibility of choice. Features and- PRODUCT
- Kingspan Water & Energy
Edincare maintains a comprehensive stock of mechanical and electrical parts in its service vehicles and at its main distribution hub. The company is a premier distributor for the majority of pump manufacturers, enabling it to offer fast cost-effective repairs- PRODUCT
- Edincare Pumps
SuperSump™ is a complete sump pump unit containing a powerful 1/3 hop cast iron pump within a polyethylene Superliner sump liner. It is used for basement drainage applications. SuperSump™ moves up to 2650 gallons per hour (12,000 l/h), resists clogging and can pump solids of 12.5 mm diameter. A larger pump, capable of pumping up to 5900 gallons- PRODUCT
- Timberwise
ABS Synconta 700 and 700L synthetic prefabricated sumps are designed as a single pumping station for the effective dewatering of buildings and areas below the sewer level. It is made in accordance with EN 12050-2. Synconta 700 and 700L are designed as complete wastewater sumps for internal (above-ground), or external (below-ground) installation
The MaestroSanisplit Pro is a fully automatic macerator suitable for pumping waste from a bathroom to a higher level when gravity drainage is not possible or economical. The system is especially suitable for commercial applications such as hotels and guesthouses, because standard domestic macerators are prone to blockages. It is suitable for- PRODUCT
- Edincare Pumps
