Water supply

The CH range from Stuart Turner offers a choice of centrifugal horizontal single-stage and multi-stage general-purpose pumps for pressurisation and liquid transfer applications in domestic and light commercial applications

The Aquaboost ABB 0305 2H-SPC/M horizontal booster set offers variable speed twin pump units capable of boosting cold water at up to 160 litres per minute, or up to 5.5 bar pressure in light commercial applications. Can be configured for duty-assist or duty-standby modes; heads up to 55m; flow rates up to 10m3/h (160 litres/min); 1-year guarantee

Sub TWI 5/TWI 5-SE submersible multi-stage pumps are 5" in bore and manufactured in stainless steel. Available as a single-phase AC current version, and an FS version with integrated float switch: pumping from wells, rainwater storage tanks and vessels; irrigation, sprinkling and pumping out; water supply; rainwater utilisation. mains connection

Aquaboost iBolt booster pumps feature a horizontal multistage pump controlled by an air-cooled variable speed frequency invertor mounted directly on the pump motor

Designed to be connected directly to the incoming mains supply, Mainsboost™ Flomate pumps provide a regulated flow of water, are WRAS-approved and fully compliant with UK water regulations. They are compact and easy to install, with no on-site commissioning required. Mainsboost™ Flomate can be installed discretely within a standard kitchen

Mainsboost VariQ is a variable speed, intelligent, energy-efficient and quiet water-boosting pump. It is designed to boost water performance from a cold water storage tank, roof tank or ground tank in domestic and light commercial applications, and is ideal for many properties with up to 3 floors and up to 10 outlets in operation simultaneously

The Sub TWU 4 Plug & Pump water supply system supplied with submersible-motor pump, control and all necessary accessories. It is used for self-sufficient water supply applications in the domestic sector: washing machines; garden sprinkling; transferring by pumping and filling; taps for process water. simple assembly, installation and operation

Mainsboost vessel systems are suitable for use where the incoming mains pressure is greater than 2 bar but the flow is insufficient to meet demand. They do not require an electrical supply and operate silently. Systems comprising one, two or three vessels of up to 2000 litres are available as standard; bespoke systems for four or more vessels are

Aquaboost iMatic booster sets have one- or two-pump submersible multi-stage pumps controlled by a dedicated variable speed frequency invertor. The single-pump 450-litre tank is fitted with an 0304 stainless steel pump, capable of delivering flow rates up to 6.0m3/hour and producing head pressures of up to 6.4 bar. Key features

SiBoost Smart Helix EXCEL is a highly efficient water supply unit (non self-priming) ready for connection with two to four vertically arranged Helix EXCEL stainless steel high-pressure centrifugal pumps switched in parallel. Each pump is equipped with an integrated air-cooled, high-efficiency frequency converter and an EC motor, including Smart

STORMBOOST boosts existing mains water pressure by up to 2.5 bar and a maximum flow rate of 12 litres per minute. It is designed to be connected directly to the incoming cold water mains and activates automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property. Featuring a

EMU polder pumps are designed for vertical installation in a variety of water supply applications. They are multistage polder pumps with semi-axial hydraulics. The housing parts are made of EN-GJL with 2K-coating or G-CuSn10, while the impellers are made of NiAl-Bz. Pressure port as flange connection: potable and process water from tanks or

Sub TWI submersible multistage pumps are available in 4, 6, x§8 and 10 inch diameters and are used for secondary hot water supply. They are manufactured with a stainless steel housing and impeller and can be used in horizontal or vertical installation: for water and potable water supply from boreholes and rainwater storage tanks; process water

FT Pipeline Systems' pipe casing spacers / insulators will centre water and sewer pipes within their casings. They support and electrically insulate a pipeline from the casing pipe. The spacers are easy to install, virtually corrosion proof, and provide insulating protection from any possible electrical shorting between the carrier pipe and

Sub TWI 5-SE is a 'plug and pump' water supply system that is supplied with a submersible pump, controls and all other accessories: pumping from wells, rainwater storage tanks and vessels; irrigation, sprinkling or pumping out; water supply; rainwater utilisation. ready-to-plug; complete accessories; thermal motor protection; pump (housing

The Wilo-ISAR MODH/SCe cold water booster set range is an evolution of the Wilo-COR MHI/SCe range. The evolved product incorporates Wilo’s Medana range of stainless steel horizontal multistage pumps and offers a captive nut connection. This feature improves the ease of maintenance, as well as reducing the number of connection points between the

Sub TWU 3-8 submersible multistage pumps are available in bore / diameter ranging from 3 to 8 inches. The 3 and 4 inch diameter pumps are suitable for building services and domestic water supply applications while the 6 and 8 inch diameter pumps can be used for higher capacity irrigation and drainage applications: for private water supply from

Aquaboost is a range of compact, submersible pump booster systems for cold water systems, featuring extermely quiet operation and automatic variable speed. They are suitable for larger domestic applications or light commercial applications: 250 to 1500 litre cold water storage capacity options; heads up to 8 bar and flow rates up to 16m3/h

Stuart Turner can make bespoke frame-mounted booster sets and structural cold water storage tank stands for the most demanding applications. Available with one-piece or sectional tanks up to 6000-litres capacity and multiple pump booster sets. Key features: 1-3 multistage pumps; fixed or variable speed control; up to 6000-litre cold water storage capacity

FT Pipeline Systems supplies steel water pipes throughout the UK in 80-3000mm diameters. A range of coating, lining and jointing options are available to suit the requirements of each individual project. Steel pipes are supplied in 6m, 9m, 12m and 13.5m lengths, or special lengths up to 18m on request. Key features: regulations DWI 31 (4) (a) and

Helix Excel is a non-self-priming, high-pressure multistage centrifugal pump. Applications include water supply and pressure boosting, industrial circulation systems, process water, cooling water circulation systems, fire extinguishing systems, washing systems and irrigation. This highly efficient fully stainless steel pump is vertical in design

Mainsboost™ iBoost systems offer a solution to inadequate flow rates and water pressure for showers and other water-using appliances. These fully integrated systems combine a 200-litre capacity cold water storage tank with a high-performance multistage pump. They are available in either fixed or variable speed models with the option to add an

The Sub TWU 3 'plug & pump' water supply system incorporates a submersible-motor pump, control and all necessary accessories. It is used for water supply from boreholes, wells and rainwater storage; domestic water supply, sprinkling and irrigation; and for pumping water without long-fibre and abrasive constituents. It is suitable for vertical or