Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Pumping stations
Packaged pumping stations are installed where the gravity drainage of surface water, wastewater or sewage is not possible. Read More
They 'lift' the liquid concerned to the requisite height, either into the drains or a septic tank. For this reason they are also known as lifting stations.
Pumping stations typically consist of one or more submersible pumps within an enclosed collection chamber. Macerating pumps are an option.
The chamber, or tank, is generally made from a thermoplastic or GRP, although steel and concrete are possible for large applications.
Smaller models are suitable for single houses . Some models handle grey water from dishwashers or washing machines, whilst others are designed for wastewater from bathrooms.
Larger models are usually installed underground. They are sized to meet the requirements of commercial premises , residential developments and factories.
Pumping stations - helping you find the best solution for your project.
Basement drainage protection
Cavity Drain Systems generally require a collection sump + pump to manage the collection and discharge of ground and/or foul water. This automatically manages the evacuation of water ingress and requires mains power to operate. The Maxx product range includes the AlertMaxx2 is a high level water alarm and monitoring system which will alert a home- PRODUCT
Delta Membrane SystemsDelta Dual V3 - below-ground packaged sump pump station
Delta Dual V3 packaged pumping station is made from high-density polyethylene and designed to collect groundwater and surface water in basement and lightwell applications. Supplied with two submersible pumps and pre-assembled internal pipework, it is suitable for use with cavity drained systems and withstands high water table conditionsDelta Dual V6 - below-ground packaged sump pump station
Delta Dual V6 is a high-capacity packaged pump station made from high-density polyethylene (HDPE) for managing groundwater and surface water in demanding environments. Designed for use with the Delta Type C System, it handles water from areas over 150m² or basements with head heights up to 10m, and includes two submersible pumps set for primary- PRODUCT
Delta Membrane SystemsSingle V3 below-ground packaged sump pump station
The Single V3 packaged pump station from DELTA® is designed to collect ground water from a cavity membrane system through the clear opening to the top of the chamber. Single V3 is for protection only and would be selected where no running water is present or expected: specifically designed for below ground applications; HDPE chamber - canDual V3 sump pump station
The Dual V3.1 groundwater sump pump is suitable for use where 1 or less inlet is required and space is limited. This packaged pump station is designed to collect ground water via a perimeter channel or 110mm pipes (129 detail) and / or clear opening to the top of the chamber: designed specifically for below ground applications; HDPE chamber; ablePumping station design, build & commissioning service
Colloide designs and builds high-quality pumping systems for pumping anything from pure water through to heavy slurries. Systems will have one or more pumps at the core, but with ancillary equipment designed into it. Variances include: various pump types such as submersible / dry well end suction / progressive cavity / vertical multistage etcDelta Foul V3 - basement wastewater package pumping station
Delta Foul V3 package pumping station is made from tank-grade HDPE and designed to collect foul and grey water from basements, below ground structures and ground floor extensions. Supplied with a pre-assembled chamber, internal pipework and a submersible pump for automatic operation- PRODUCT
Delta Membrane SystemsSDS Weholite Pumping Stations
Weholite Packaged Pumping Stations are manufactured and assembled off-site and are designed to meet project-specific requirements using a standard set of components. This improves site productivity, reduces installation time and construction materials, and provides major savings on programme costs. These systems are manufactured to varying depths
- The AquaFlush 60 HT is a fully automatic, high-temperature, wastewater system suitable for pumping hot water containing particles to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste
- PRODUCT
- Edincare Pumps
Spare parts service
Visit siteEdincare maintains a comprehensive stock of mechanical and electrical parts in its service vehicles and at its main distribution hub. The company is a premier distributor for the majority of pump manufacturers, enabling it to offer fast cost-effective repairs- PRODUCT
- Edincare Pumps
AutoFlush Twin pumping system
Visit siteThe AutoFlush Twin is a fully automatic wastewater system suitable for pumping grey water to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from sinks, washing machines or- PRODUCT
- Edincare Pumps
AutoFlush 90 CSL pumping system
Visit siteThe AutoFlush 90 CSL is a fully automatic wastewater system suitable for pumping wastewater containing mildly aggressive chemicals to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste- PRODUCT
- Edincare Pumps
AutoFlush 30 VOX pumping system
Visit siteThe AutoFlush 30 VOX is a fully automatic system suitable for pumping grey water containing particles to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from sinks or coffee- PRODUCT
- Edincare Pumps
AquaFlush (standard head) pumping system
Visit siteThe AquaFlush is a fully automatic wastewater pumping system suitable for pumping grey water to a higher level when gravity drainage is not possible or economical to install. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from sinks, washing machines or- PRODUCT
- Edincare Pumps
Lifting station type ABS Sanimax
Visit siteSanimax is a complete wastewater pumping unit for installation at floor level. It is fitted with an ABS submersible pump from the Robusta or MF ranges. Sanimax is suitable for the removal of liquids containing solid particles up to 30mm from hand wash basins, domestic washing machines or showers. The pumping unit is in accordance with EN 12050-2Atlas 70 (single phase) pumping station
Visit siteThe Atlas 70 (Single Phase) is a fully automatic floor-mounted twin pumping station suitable for pumping foul water or storm water to a higher level when gravity drainage is not possible or economical. The system is suitable for installation at the initial building stage or for retrofitting to existing buildings. It can accept waste from- PRODUCT
- Edincare Pumps
PowerFlush heavy-duty macerator
Visit siteThe PowerFlush is a fully automatic macerator suitable for pumping waste from a bathroom to a higher level when gravity drainage is not possible or economical. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste connections from toilets, basins, showers or bidets. The- PRODUCT
- Edincare Pumps
- ABS Piranhamat 100 and 120 are compact fecal pumping units for direct connection to a single toilet in accordance with EN 12050-3. They are ready-to-plug-in units, with a gas- and odor-tight synthetic tank: toilets; hand washbasins; showers; bidets. designed for the removal of effluent from a WC located below the sewer backwash level, or where the
- The Wilo HiDrainlift 3 is a small, floor-mounted lifting unit designed for pumping sewage and wastewater coming from showers or washbasins. They are intended for the pumping of sewage without faeces (according to DIN EN 12050-2) that cannot be piped to the sewer system through the use of natural falls: very compact construction for installation in
MagnaPro Macerator 2000 pumping station
Visit siteThe MagnaPro Macerator 2000 is a fully automatic pumping station specifically designed for pumping foul water and stormwater when gravity drainage is not possible or economical. The system is suitable for installation at the initial building stage or for retrofitting to existing buildings. It can accept waste from basements or entire houses. The- PRODUCT
- Edincare Pumps
PowerMaster Twin macerating pumping station
Visit siteThe PowerMaster Twin is a fully automatic small-bore floor-mounted macerating pumping station. It is suitable for pumping foul water and wastewater to a higher level when gravity drainage is not possible or economical. The system is suitable for installing at the initial building stage or for retrofitting to existing buildings. It can accept waste- PRODUCT
- Edincare Pumps
Klargester Horizontal Pumping Station
Visit siteWhen power supplies fail, Klargester Commercial responds instantly, separating liquids and solids into a separate chamber and storing waste for up to 24 hours. Once power is restored, the pumps will work normally again without further maintenance. Klargester Commercial pumping stations are made from robust GRP. They are designed as a single-piece- PRODUCT
- Kingspan Water & Energy
Lifting station type ABS Sanimat 2002
Visit siteThe Sanimat 2002 is a flood-proof double lifting station for automatic sewage pumping from areas below the backwash level. The system is in accordance with EN 12050-1: domestic houses; large public buildings; commercial developments; new build; refurbishment applications. plug-in unit with CEE plug-and-phase sequence changeover facility; easilyMagnaPro Vortex 2000 pumping station
Visit siteThe MagnaPro Vortex 2000 is a fully automatic pumping station specifically designed for pumping foul water or stormwater when gravity drainage is not possible or economical. The system is suitable for installation at the initial building stage or for retrofitting to existing buildings. It can accept waste from basements or entire houses. The- PRODUCT
- Edincare Pumps

Sign up to receive the free BUILDING SERVICES bulletin
By signing up, you agree to our Terms and Conditions and Privacy Policy.
We won’t share your email address with anyone without your consent. Bulletins are sent on a weekly basis. You can unsubscribe anytime.