Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Dampers
Dampers - helping you find the best solution for your project.
Rectangular fire damper for the isolation of duct penetrations between fire compartments. Available in many different sizes and constructions for a variety of installation situations. TROX fire dampers of Type FK-EU, with CE marking and declaration of performance
SV straightening vane dampers are offered as a standard method of flow directional control and are suitable for use with linear grilles from the Brooke Air range. The vanes are normally supplied fixed to the air terminal when specified, but can also be supplied separately for duct mounted applications. The standard method of adjustment is by hand
TROX tunnel dampers of Type JF are specially designed safety components that meet the RABT and RVS requirements; for opening and closing smoke extract ducts; used in ventilation and smoke extract systems in underground transport systems; can also be used as shut-off dampers for fans; installation usually either above the roadway in an intermediate
Rectangular smoke control dampers with extract ventilation function, for smoke extract with mechanical smoke extract systems or as an additional supply air inlet. Smoke control dampers of Type EK-EU, with CE marking and declaration of performance, for smoke extract with mechanical smoke extract systems; also for natural smoke and heat exhaust systems
Small circular fire damper for the isolation of duct penetrations between fire compartments, available in ten nominal sizes fire dampers of Type FKRS-EU, with CE marking and declaration of performance, for the isolation of duct penetrations between fire compartments in the event of a fire; to prevent the propagation of fire and smoke through
Large circular fire damper for the isolation of duct penetrations between fire compartments, available in nine nominal sizes fire dampers of Type FKR-EU, with CE marking and declaration of performance, for the isolation of duct penetrations between fire compartments in the event of a fire; to prevent the propagation of fire and smoke through
The PRV pressure regulating damper is designed for use either as a differential room pressure controller or as a non-return exhaust valve and is suitable for vertical mounting in partitions and walls. The units can be sized to regulate room pressures against a design air flow rate, but can also be adjusted after installation using balance weights
The Crossvent damper unit can be used in conjunction with passive stack roof ventilation terminals or as part of a building cross ventilation system. The unit can also be mounted behind radiators to draw warm fresh air into a building during winter. The Crossvent unit is designed and manufactured according to clients requirements. It is CAD-drawn- PRODUCT
- Midtherm Engineering
smoke control damper of Type EK-JZ, with CE marking and declaration of performance, for heat and smoke exhaust with mechanical smoke extract systems; for the provision of fresh air (additional supply air) to mechanical smoke extract systems; in pressurisation systems; can be used for ventilation if the mechanical smoke extract system has been
OB opposed blade dampers are offered as a standard method of flow control or equalisation and are suitable for use with the majority of grilles and diffusers within the Brooke Air range. Dampers are normally supplied fixed to the air terminal when specified, but can also be supplied separately for duct mounted applications. The standard method of
The fire-rated intumescent grille is designed for use as a fire barrier in either doors or partitions and has a 1 hour fire rating in accordance with BS 476 Part 8 "Test methods and criteria for the fire resistance of elements of building construction". The core of the grille comprises a lattice of Palusol 210 intumescent material which swells at
FKA2-EU is a rectangular fire damper for the isolation of duct penetrations between fire compartments. It will prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. Class of performance up to EI 120
Dampers - helping you find the best companies for your project.
Advanced Air
Advanced Air (UK) Ltd, Burrell Way, Thetford, IP24 3WBAutomated Control Services
Supplies and installs automatic opening ventilation systems which react immediately to the detection of smoke, venting toxic fumes from escape routes and stairwells. All systems are provided with an emergency battery back up system as standard, so that smoke control will still function in the event of a power failure
Unit 16, Hightown Industrial Estate, Crow Arch Lane, Ringwood, BH24 1NDBSB Engineering Services
Manufactures air, fire and smoke control dampers that are tested and conform to national and international specifications
Unit E, Tribune Drive, Trinity Trading Estate, Sittingbourne, ME10 2PDBrooke Air
The Dampers of Brooke Air are designed to control the room pressure and air flow or to act as a fire and smoke barrier
JC House, Hurricane Way, Wickford Business Park, Wickford, SS11 8YBCEVAC
Hildene House, Bulls Head Green, Ewhurst, Cranleigh, GU6 7PGDuctform Ventilation
Uses CAD/CAM draughting as basis for the design and manufacture low, medium and high pressure ductwork, as well as stainless steel, fire-rated, dust extract and oil rig systems. Also offers accessories including access doors, control dampers, drive cleats, corners and supports. Nationwide installation service for all sizes of contract
17 Faraday Road, Southfield Industrial Estate, Glenrothes, KY6 2RUExyte
Suppliers of insulated and non-insulated flexible ducting which complies to independent fire tests. Constructed from PVC and a fibre laminate, the ducting is available in diameters ranging from 102-508mm. Spirally wound, galvanised steel ducting is also offered in circular and oval configurations, along with a wide range of complementary fittings
Lord Street, Bury, BL9 0RGFantech Ventilation
Unit 3, Airton Business Park, Airton Road, Tallaght, Dublin 24, Republic of IrelandGilberts (Blackpool)
Manufactures a curtain-type fire damper designed to stop the spread of flames through ductwork. Fitted where the ductwork passes through an existing barrier, the damper is activated by a fusible link element set to trigger at 72°C. Operation of the link immediately shuts the steel blades under spring tension, thus providing a solid fire barrier
Clifton Road, Blackpool, FY4 4QTGreenbox Company
Manufactures volume control dampers for air handling and ventilation systems. Corrosion resistant, the dampers operate in temperatures between -15 and 80°C, and have rigid extruded PVC aerofoil blade sections. Available in sizes from 100x100mm up to 2000x1200mm in a single section. Larger sizes are available in multiple section units
Unit 11, Wassage Way, Hampton Lovett Industrial Estate, Droitwich, WR9 0NXHalton Products
Halton ventilation fire safety systems include fire dampers, smoke and smoke evacuation dampers and fire valves. The Technical Research Centre of Finland (VTT) is in charge of the fire dampers quality control. In addition, all Halton fire dampers are tested prior to their delivery to customers
4 The Matchyns, London Road, Rivenhall, Witham, CM8 3HAHotchkiss Air Supply
Offers curtain-bladed fire dampers to stop the spread of flame through ducts, walls, floors and ceilings. Standard dampers have a two-hour fire rating and are made from galvanised mild steel. Blades can be manufactured from stainless steel, if required. The dampers are suitable for installation in rectangular, circular and flat oval ducting
Heath Mill Road, Wombourne, Wolverhampton, WV5 8AP
