Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Pumps, valves & plumbing
(267)
Pumps, valves and plumbing for commercial and industrial building services. Clean and wastewater movement, pressure boosting and circulation. Isolation, control and safety valves. Pipework, fittings and connectors. Hot and cold water distribution, HVAC and process systems. Potable water hygiene and backflow protection. Installation and maintenance components.
Pumps, valves & plumbing - helping you find the best solution for your project.
Instaflex - polybutene plastic piping for water and building systems
INSTAFLEX plastic pipeline system from Georg Fischer Piping Systems is made from polybutene for building technology applications, including drinking water, cooling, and compressed air: plastic pipeline system for water, cooling, and compressed air in buildings; made from polybutene, which is corrosion-free and prevents limescale and taste- PRODUCT
George Fischer Sales
JRG Sanipex - plastic pipe-in-pipe system for drinking water supply
JRG Sanipex is a plastic pipe-in-pipe system for drinking water installations, made from cross-linked polyethylene (PE-X) inner pipes within protective conduits. Designed for water pocket-free, full-flow connections, it allows easy replacement of inner pipes and direct installation in concrete: pipe-in-pipe system for safe, hygienic drinking water- PRODUCT
George Fischer Sales
JRG Valves - bronze sanitary valves for building water systems
GF JRG sanitary valves are made from corrosion-resistant bronze for building technology, designed for hot and cold water and oil-free compressed air systems. Hygienic, dead space free construction and high-quality materials support long-term performance and high standards of operational safety: sanitary valve for water and compressed air systems- PRODUCT
George Fischer Sales
BIOCAT - salt-free limescale protection device for drinking water systems
BIOCAT GF Industry and Infrastructure Flow Solutions BIOCAT is a natural limescale protection device for drinking water systems, made to prevent limescale build-up in pipes and appliances without using salt or chemicals. Uses a biomineralisation process to convert dissolved calcium and carbonate into small limescale crystals that are flushed away- PRODUCT
George Fischer Sales
JRG Sanipex MT - plastic multilayer pipe system for water and heating
JRG Sanipex MT is a multilayer piping system from Georg Fischer Piping Systems, made for drinking water, heating, cooling, and compressed air installations in residential and commercial buildings. Uses a two-layer injection moulding process and flared clamp connection technology for hygienic, water-pocket free joints: multilayer pipe and fitting- PRODUCT
George Fischer Sales
IJOINT - plastic pipe fittings for water supply and irrigation systems
iJOINT compression fittings by Georg Fischer Piping Systems connect PE pipes for water supply, irrigation, and mining, with safe, tool-free installation and worldwide drinking water certification. Suitable for PN16 bar, these fittings include couplings, reductions, T-pieces, elbows, threaded connections, and end caps in sizes from 16 mm to 110 mm- PRODUCT
George Fischer Sales
COOL-FIT ABS Plus for secondary cooling and refrigeration
COOL-FIT ABS Plus is a completely pre-insulated plastic pipe system for secondary cooling and refrigeration systems operated with brine or water diluted glycols. The system is based on proven and cold-shock resistant ABS pipes and fittings, which are insulated with high-quality PUR foam in addition to a robust and UV-resistant outer pipe. The- PRODUCT
George Fischer Sales
COOL-FIT 2.0 - plastic chilled-water pre-insulated piping system
COOL-FIT 2.0 is a pre-insulated 3-in-1 plastic piping system made for chilled water in indoor secondary cooling loops, designed to prevent corrosion and condensation in commercial, residential and industrial buildings. 30% higher thermal energy efficiency than metal alternatives- PRODUCT
George Fischer Sales
AQUASYSTEM - PP-R hot and cold water pipes and fittings for buildings
The Aquasystem Polypropylene Random (PP-R) piping system is suitable for both hot and cold water and for heating systems due to the material's high resistance to pressure and temperature. Complete range of PP-R pipes (PN 20, PN 10, Fibre and PP-R ALU); wide range of fittings (socket fusion, threaded, electrofusion, couplers, branch saddles- PRODUCT
George Fischer Sales
iFIT - push-fit plumbing system for PB and ML pipes, potable water, heating
iFIT is a push-fit plumbing system for connecting polybutene and multilayer composite pipes in sizes d16–32, using PPSU, brass, and bronze fittings with modular adapter technology from GF Industry and Infrastructure Flow Solutions: push-fit system for polybutene and multilayer composite pipes in d16–32; modular adapters allow one fitting to- PRODUCT
George Fischer Sales
AquaTap Recirculating Faucet - pvdf lab tap for pure water systems
AquaTap™ Recirculating Faucet is a laboratory tap system designed for continuous deionised (DI) water flow, using an Inline Flow Diverter (IFD) to eliminate dead-legs and maintain water purity. Made from high purity PVDF, it prevents stagnant water and organic growth, with no wetted metal parts and low installation requirements: laboratory tap- PRODUCT
George Fischer Sales
New piping for water distribution at acute-care hospital
The INSTAFLEX piping system was selected for the renovation of critical areas of Oberengadin Hospital in Switzerland. The hygienic, all-plastic pipe system was designed for demanding applications with the highest quality requirements. The corrosion and incrustation-free plastic system was favoured over the previously used galvanised steel pipes
GF Piping Systems uses COOL-FIT for offices and training center
Things can sometimes get heated at the global headquarters of piping manufacturer GF Piping Systems in Schaffhausen, Switzerland. Until now, the problem with training courses on warm summer days was that the seminar rooms heated up considerably. Therefore, the office building needed to be equipped with a new cooling system. To keep the conversion- PROJECT
George Fischer Sales
Herz metering stations are available in sizes from 0.5 to 2 inches, including a 0.5 inch low-flow version. The metering stations are manufactured in DZR brass and supplied with pre-fitted test points. The valves are pressure rated to PN16. Metering stations are used in the flow and partnered with a double regulating valve in the return to give the- PRODUCT
- Herz Valves UK
Hep2O is a flexible, push-fit plumbing system for professional installers. It is suitable for domestic hot and cold water supply, including potable water, as well as central and underfloor heating. The Hep2O key system is tamper resistant, but can be easily demounted. Hep2O key is compatible with traditional copper pipe and the Wavin Tigris K5
Herz pressure reducing valves are WRAS approved and made to BS EN 1567. The valves are suitable for water heating and cooling applications. Pressure reducing valves are made from either DZR brass or cast gunmetal. Technical data: Maximum fluid temperature: 80°C. Maximum inlet pressure: 25 bar. Adjustable pressure range: 1.5-6 bar. Pressure- PRODUCT
- Herz Valves UK
Glanded pump in in-line design with threaded connection or flange connection For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems high-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2
Hep2O keyless push-fit pipe fittings are made for quick, secure plumbing connections in repair, maintenance and improvement projects, using a keyless 2-stage twist and push mechanism for easy installation and adjustment. 50-year guarantee
VeroLine-IP-Z is a glanded circulation pump of in-line design with a threaded connection. It is a single-stage, low-pressure centrifugal pump. It is used for pumping potable water, cold and hot water (in accordance with VDI 2035) without abrasive substances, in heating, cold water and cooling water systems: high resistance to corrosive fluids due
The ACO Quatrix® with access chamber is an in-line, Type 3 automated anti-flooding device designed for domestic grey water or black (faecal wastewater) water connections. It conforms to the requirements of BS EN 13564. The ACO Quatrix® is installed into solid floor constructions with connections to 110mm or 160mm Ø drain pipe. It has a height- PRODUCT
- ACO Building Drainage Ltd
Herz double check valves are used for heating applications and are WRAS approved. They have a brass body, elastomer seals, acetyl copolymer check cartridges and a stainless steel spring. Dimensions: Widths: 25, 30, 38, 46, 52 and 65mm. Lengths: 81, 92, 100, 122, 135 and 174mm. Specification: Test pressure: 16 bar. Working pressures: 0.1-10 bar- PRODUCT
- Herz Valves UK
The TS-E thermostatic valve is suitable for one- or two-pipe heating systems, and is available in straight, angled and reverse angled versions. Standard models feature a threaded socket, are nickel plated and have a white screw cap. Universal models feature a special socket for threaded pipe and a compression union. An O-ring is used as a spindle- PRODUCT
- Herz Valves UK
CronoNorm-NL is a single-stage, low-pressure centrifugal pump with an axial suction point, according to EN 733 and ISO 5199, mounted on a baseplate: pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes; pumping heating water in accordance with VDI 2035
The ACO Quatrix® is an in-line, Type 3 automated anti-flooding device designed for domestic grey water or black (faecal wastewater) water connections. It conforms to the requirements of BS EN 13564. The ACO Quatrix® is designed for installation in site-built access chambers or wall-mounted applications. It can be connected to 110mm or 160mm- PRODUCT
- ACO Building Drainage Ltd
