Building air conditioning

Reznor's CirculAir Industrial Air Rotation Unit is an energy-efficient air rotation and heating system for large industrial and commercial spaces. Designed to heat areas up to 37,000m³ with a single unit, it recirculates warm and ambient air to eliminate temperature stratification and reduce energy use. Combines air movement and heating in one

CAREL's experience in the humidification sector, along with Ecoflam gas heating technology, has enabled the development of the gaSteam range of humidifiers that run on gas, a source of energy that is often more economical than electricity. CAREL's unique burner and heat exchanger provide class-leading efficiency of up to 96%. The gaSteam

The ultimateSteam direct steam humidifiers are designed to receive pressurised steam from a centralised system, treat it to remove all the condensate, and distribute the dry steam directly into the duct or air handling unit: flow-rate ranges from 1 to 1000kg/h; distributor is made from stainless steel, allowing long periods without maintenance

humiSteam is an immersed electrode humidifier. Its reliability and flexibility make it ideal for a large range of applications, including civil environments, offices, hospitals, industrial facilities and steam baths. humiSteam is suitable for both installation in a room, using the steam blower, and for installation in an air duct, using the new

humisonic is an ultrasonic piezoelectric humidifier that has been designed for air handling and air conditioning units with low-energy consumption. A piezoelectric transducer immersed into water converts electricity into high-frequency mechanical vibrations which generates compression and depression waves where the water is forced to vaporise at

Modern technology has enabled the installation of efficient, carefully controlled steam baths at spas, fitness centres, Rasul rooms, and private homes. The humiSteam Wellness model is specifically designed for steam bath applications with additional features to manage the extract fans and essence pumps necessary for modern and efficient steam

heaterSteam is CARELs resistive element type humidifier. It is suitable for high precision applications requiring the utmost control in humidity. It is capable of +/-1%rh control, subject to precise temperature control, water quality and correct modulation. heaterSteam produces aseptic steam from drinking, demineralised or mains water. It is ideal

compactSteam is an immersed electrode humidifier that contains all the features of the humiSteam system, but in a smaller size. It is ideal for the humidification of prestigious residential environments, professional offices or small and medium retail premises: range from 1.5 to 3.2kg/h; built-in steam distributor with adjustable louvers and

The MCmultizone system uses compressed air to atomise the water into very fine droplets that evaporate spontaneously in the air, humidifying and cooling it. In fact, evaporation occurs by absorbing sensible heat from the air that, as a consequence, is cooled: control cabinet, fitted with the electronic controller; special atomising nozzles which

humisonic is an ultrasonic piezoelectric humidifier that has been designed for cold rooms or display cabinets. Piezoelectric transducers that are immersed in water turn electricity into high-frequency mechanical vibrations, atomising the water into an extremely fine mist, with minimum energy consumption. The mechanical unit is made of stainless

humiDisk is a small yet sturdy humidifier that uses a spinning disk to atomise water and transform it into millions of very small drops that, blown by a built-in fan, are introduced into the environment, where they evaporate, humidifying and cooling the air: ON/OFF control; very frequent changing of the water, fresh water is always atomised; tank

humiFog uses a special pump to deliver demineralised water at high pressure through stainless steel nozzles and produce a very fine and uniform fog. The droplets are atomised then spontaneously evaporate, humidifying and cooling the air. The sophisticated control system combines the action of an inverter, which controls the pump flow-rate, and a

CAREL offers OEM humidification control systems for manufacturers of air handling units. The new OEM humidifier kits have been developed to be a universal, flexible and simple solution to fit any requirement a manufacturer might have. They are ideal for installation in air close control and traditional handling units, due to their flexibility and

humiSonic for fan coils is an ultrasonic piezoelectric humidifier that has been designed specifically for installation in fan coils units. A piezoelectric transducer immersed into water converts electricity into high-frequency mechanical vibrations which generates compression and depression waves where the water is forced to vaporise at low

humiSteam X-Plus is an immersed electrode humidifier. It is suitable for installation in a room, using a steam blower, and for air-duct installation, using the new range of linear steam distributors: 1-130kg/hr; all units are fitted with a drain pump; patented anti foaming system; disposable and cleanable cylinders option; large cylinders with