Heat source Air
Applications Water heaters
Collection / extraction Air-to-water inverters
Heating capacity (kW) 2.15
 
 

SWP heat pumps use the thermal energy of air for production of domestic hot water. The process occurs in the most efficient and profitable way with average COPs > 3. The energy advantage of SWP heat pumps also safeguards the environment, using most of its energy from solar radiation. Easy installation, silent and reliable functioning and very low maintenance requirements complete the benefits of this highly ecological and economic system.

Features:

  • Steel tank with a double vitrification layer with storage capacity of 200 and 300 litres
  • Condenser wrapped externally to the boiler with no scales and refrigerant-water fluid contamination 
  • Auxiliary coil to be used together with a boiler or solar panels
  • Integrated NTC sensor to control water temperature
  • External air sensor for automatic connection of the electric heater with unfavourable temperatures in heat pump mode
  • Anti-corrosion magnesium anode
  • Hydraulic connections located at rear of unit
  • Thermal insulation in very thick expanded polyurethane foam with silver grey RAL 2006 external covering (ABS)
  • Adjustable support feet
  • Electric heater 1.5kW 230V
  • IEC power supply connector with insulating sheath
  • High pressure safety devices
  • Reciprocating hermetic compressor
  • Radial fan with an adjustment of 40% of the nominal flow rate
  • Electronic controller
  • Heating capacity: 2.15kW


SWP heat pumps use the thermal energy of air for production of domestic hot water. The process occurs in the most efficient and profitable way with average COPs > 3. The energy advantage of SWP heat pumps also safeguards the environment, using most of its energy from solar radiation. Easy installation, silent and reliable functioning and very low maintenance requirements complete the benefits of this highly ecological and economic system.

Features:

  • Steel tank with a double vitrification layer with storage capacity of 200 and 300 litres
  • Condenser wrapped externally to the boiler with no scales and refrigerant-water fluid contamination 
  • Auxiliary coil to be used together with a boiler or solar panels
  • Integrated NTC sensor to control water temperature
  • External air sensor for automatic connection of the electric heater with unfavourable temperatures in heat pump mode
  • Anti-corrosion magnesium anode
  • Hydraulic connections located at rear of unit
  • Thermal insulation in very thick expanded polyurethane foam with silver grey RAL 2006 external covering (ABS)
  • Adjustable support feet
  • Electric heater 1.5kW 230V
  • IEC power supply connector with insulating sheath
  • High pressure safety devices
  • Reciprocating hermetic compressor
  • Radial fan with an adjustment of 40% of the nominal flow rate
  • Electronic controller
  • Heating capacity: 2.15kW