Type Condensers
Installation Floor mounted
Wall mounted
 
 
 

Designed and optimised for R407C, this range of 20 air-cooled condensing units and heat pumps covers the range of 3-80W in cooling mode. Standard head pressure control and mains isolator. Small footprint and slimline design are ideal for wall-mounted installation.

A large surface area coil is ideally positioned to optimise airflow and heat transfer. Units feature axial flow fan assembly with low noise sickle type blades and inlet ring. External rotor motor allows the use of a low power output, single phase, speed controllable motor to power the fan.

Fitted with a thermostatic expansion valve and check valve assembly to prevent short circuiting of refrigerant, together with large capacity suction accumulator and a reversing valve.

Benefits

  • Head pressure control optimising performance.
  • Microprocessor system allows indoor unit to be matched to CU, communication via 2-wire link.
  • Hot gas bypass valve for capacity control – modulates down to 40% of full capacity.
  • External rotor motor allows use of low power output single phase speed controllable motor with inbuilt thermal overload.
  • Thermostatic expansion valve and check valve assembly prevents short circuiting of refrigerant.
  • Scroll compressors for reduced sound, higher efficiency and lower electrical starting currents (CUS5 – 12 and CUS15 – 30D).
  • Head pressure control optimising performance.
  • External rotor motor allows use of low power output single phase speed controllable motor with inbuilt thermal overload.

Features and options

CU1 – CUS4: 3 - 13kW total heat rejection

  • 8 models: cooling only and heat pump variants
  • Reciprocating compressor
  • Wall mountable, freeing up floor space
  • Small footprint with slimline design
  • Head pressure optimising efficiency

CUS5 - 12: 14 -35kW total heat rejection

  • 5 models: cooling only and heat pump variants
  • Floor-mounted for external location
  • Low profile

CUS15 - 30D: 40-80kW total heat rejection

  • 7 models: cooling only
  • Scroll compressors for reduced sound, higher efficiency and lower electrical starting currents
  • Floor-mounted for external locations
  • Small footprint


Designed and optimised for R407C, this range of 20 air-cooled condensing units and heat pumps covers the range of 3-80W in cooling mode. Standard head pressure control and mains isolator. Small footprint and slimline design are ideal for wall-mounted installation.

A large surface area coil is ideally positioned to optimise airflow and heat transfer. Units feature axial flow fan assembly with low noise sickle type blades and inlet ring. External rotor motor allows the use of a low power output, single phase, speed controllable motor to power the fan.

Fitted with a thermostatic expansion valve and check valve assembly to prevent short circuiting of refrigerant, together with large capacity suction accumulator and a reversing valve.

Benefits

  • Head pressure control optimising performance.
  • Microprocessor system allows indoor unit to be matched to CU, communication via 2-wire link.
  • Hot gas bypass valve for capacity control – modulates down to 40% of full capacity.
  • External rotor motor allows use of low power output single phase speed controllable motor with inbuilt thermal overload.
  • Thermostatic expansion valve and check valve assembly prevents short circuiting of refrigerant.
  • Scroll compressors for reduced sound, higher efficiency and lower electrical starting currents (CUS5 – 12 and CUS15 – 30D).
  • Head pressure control optimising performance.
  • External rotor motor allows use of low power output single phase speed controllable motor with inbuilt thermal overload.

Features and options

CU1 – CUS4: 3 - 13kW total heat rejection

  • 8 models: cooling only and heat pump variants
  • Reciprocating compressor
  • Wall mountable, freeing up floor space
  • Small footprint with slimline design
  • Head pressure optimising efficiency

CUS5 - 12: 14 -35kW total heat rejection

  • 5 models: cooling only and heat pump variants
  • Floor-mounted for external location
  • Low profile

CUS15 - 30D: 40-80kW total heat rejection

  • 7 models: cooling only
  • Scroll compressors for reduced sound, higher efficiency and lower electrical starting currents
  • Floor-mounted for external locations
  • Small footprint


Interested in this product?
Call 0113 239 1000
OR
 
 
 
Downloads
  • Air cooled condensing units CU1-4
    Air cooled condensing units CU1-4
    14pp 681.75KB
    Download
  • Air cooled condensing units CU5-12
    Air cooled condensing units CU5-12
    18pp 808.93KB
    Download
  • Air cooled condensing units CU1-12 I&M
    Air cooled condensing units CU1-12 I&M
    30pp 778.92KB
    Download
  • Air cooled condensing units CU15-60 I&M
    Air cooled condensing units CU15-60 I&M
    28pp 496.66KB
    Download
  • Air cooled condensing units CU15-60
    Air cooled condensing units CU15-60
    12pp 464.8KB
    Download
 
 
 
Enquire
 


Also by Airedale International Air Conditioning

Airedale International Air Conditioning address and contact details

Airedale International Air Conditioning Ltd
Leeds Road
Rawdon
Leeds
LS19 6JY
Tel: 0113 239 1000
Fax: 0113 250 7219
View on map - 4 addresses
 
Follow Airedale International Air Conditioning
 
Not found what you're looking for? View other options

Ask Airedale International Air Conditioning about

Air-cooled condensing unit