Space cooling

An air-cooled, single/dual circuit R134a/R1234ze high capacity chiller designed around revolutionary centrifugal Turbocor compressors integrated with cutting edge components. Brilliantly engineered, using Airedale’s vast expertise in cooling technology, the TurboChill™ minimises environmental impact by lifting efficiency to new heights and pushing

Halo® is one of Frenger's latest range of high-performance Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. Halo® is only 230mm deep and can achieve up to 1463 watts total cooling (based on a 1.2m long beam with a 10 dTK between room and mean water temperature and 44 ltrs/sec of air

Compact® is one of Frenger's latest range of high-performance Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. Compact® is only 133mm deep and can achieve up to 1092 watts per meter total cooling (based on 10dTK and 26 ltrs/sec/m for a 1.8m long beam, supplied at 16°C with a 100Pa

The A11 hybrid cooling ceiling continuously embeds energy savings possibilities: water as cooling medium - cooling water to cool 80% of a room; using the building mass - one third of the energy is temporarily stored and converted at night; high temperature of cooling water - 18°C (16–20°C); requirement dependant control - relative to quantity and

TROX TCB-RB is a passive chilled beam with 2-pipe heat exchanger for ceiling installation: beams can be supplied in various lengths from 1200-4500mm in 100mm increments; for room heights from 2.60m; suitable for mounting within a ceiling void above a perforated ceiling tile or can be freely suspended; comfortable room cooling, offering low

The Bulkhead Active Chilled Beam is one of Frenger's latest range of high-performance Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. The Bulkhead beam contains a number of performance-enhancing features as can be expected from the Frenger brand. The beam is designed for discreet

X-Wing® is one of Frenger's latest range of next-generation Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. X-Wing® is only 125mm deep and can achieve up to 370 watts per meter as an exposed passive "Radiant" / convective cooling unit and up to 170 watts/m2 when concealed behind an

Ultima 300 is one of Frenger's latest range of high-performance Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. Ultima 300 is only 290mm deep and 292mm wide and can achieve 525 watts per meter total cooling (based on 10?tk and 26 ltrs/sec/m for a 2.4m long beam supplied at 16°C

CL is an air cooled chiller and heat pump with plug fan. Features: available in 10 sizes; cooling only and heat pump models "H"; manufactured with refrigerant R410A; versions available: "°" Standard "P" with pump, expansion tank and water filter; "A" with pump, expansion tank, water filter and buffer tank; all versions are available for the

Water-water heat pump for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater, domestic hot water can also be produced: cooling capacity: 166 ÷ 672 kW; heating capacity: 183 ÷ 784 kW; r134a refrigerant; XP10 refrigerant (Option); cooling and heating; twin

Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced. Features: cooling capacity: 628 ÷ 1415 kW; heating capacity: 671 ÷ 1519 kW; r134a refrigerant; r513A (XP10) refrigerant (Option); cooling only; heating only

Condenserless water chiller for indoor installation. Suitable for cooling only, for large-sized services in residential and commercial buildings: cooling capacity: 547 ÷ 1328 kW; r134a refrigerant; r513A (XP10) refrigerant (Option); condenserless; twin screw compressor; shell and tube exchanger; heat recovery (Option); lownoise version (Option

Aermec offers the WDR range of dry coolers

Parasol modules deliver cooling, heating and ventilation services. Unlike chilled beams, they distribute air in four directions rather than two. This maximises the area in which supply air is mixed with the room air, which allows the modules to discharge air at high capacity. The modules four-way air diffusion is adjustable on each side. The air

Primo climate control systems are designed for installation along perimeter walls. They provide heating, cooling and ventilation functions, as well as integrated room temperature control, and space for electrical trunking. They are high-capacity systems that have small space requirements. Prefabricated parts help to ensure simple installation

The TurboChill™ Water Cooled is a high capacity, water-cooled, single circuit chiller, which offers exceptional ESEER values of up to 8.86. With 3 module variants, including the R1234ze TG310 range which has been specifically developed for use with the low Global Warming Potential (GWP) refrigerant R1234ze, the TurboChill™ Water Cooled utilises

Reversible air/water heat pump for outdoor installation. Suitable for air-conditioning and heating, and the production of domestic hot water for small/medium services. Features: cooling capacity: 6.76 ÷ 29.2 kW; heating capacity: 8.03 ÷ 33.51 kW; r410A refrigerant; cooling and heating; DHW; scroll compressor; axial fan; plate exchanger; pump kit

Aermec offers the CDR range of air remote condensers. General characteristics: two exchangers arranged in a V; two independent cooling circuits; two rows of fans, diameter 800mm; 6 to 10 fans; separate ventilation compartment for each fan. Construction characteristics: units are designed for outdoor installation and therefore made with

FRB passive chilled beams are designed for comfort cooling and visible suspended installation in cellular and open-plan offices, hotels, class rooms, conference rooms, computer rooms, restaurants, banks and shops. They have a high cooling capacity, even when there is a large difference in temperature between the coolant supply and the return

TROX UK designs and manufactures bespoke Multi-Service Chilled Beams (MSCB) to meet technical specifications and design requirements. Advantages include improved efficiency of space utilisation. Suspended ceilings are eliminated with a slab-to-slab minimum height of only 2.8m. Chilled beams require comparatively low air flow rates

Cornice™ is one of Frenger's latest range of high-performance Chilled Beams. Energy efficiency has been a key driver for such advancements in Frenger's Chilled Beam Technology. Cornice™ is only 340mm deep and can achieve 630 W/m total cooling (based on 10dtK and 4.86 l/s for a beam supplied at 16°C with a 100Pa). The Cornice™ beam contains a

The InRak is an efficient in-row cooling solution for high density data centre applications. Positioned next to a rack or within a row of server cabinets, the InRak directs air horizontally to the front of the server racks. The InRak has in-built resilience and excellent efficiencies, lifting the InRak’s EER to 90.3 during part load operation