Heating & cooling

The Comfia underfloor heating system uses polybutylene pipes due to their flexible installation properties and long service life. Polybutylene is highly flexible, creep resistant, non corrosive, resistant to frost damage, and is unaffected by hard, soft or aggressive water conditions. Designed to last the life of a building, with an industry

Colloide designs and builds customised energy centres that generate heat and distribute it to buildings or district heat networks. The company's cutting-edge technology is designed to generate heat that can be custom-distributed to buildings or district heat networks, maximising efficiency and saving money. CHP units can also be incorporated

RHC+ Gas Fired Heat Module is a modular heating unit made for integration into ductwork and air handling systems, with heat outputs from 10 to 1000 kW. Designed for both indoor and outdoor use, it is suitable for replacing LPHW or electric coils with gas, and can be configured vertically, horizontally, or stacked to meet various industrial and

AC Mini commercial air curtains are electric over-door heaters designed for small commercial or retail entrances up to 1m wide. Made from a semi-circular profile, they can be wall or ceiling mounted. Heating capacities range from 3kW to 6kW, with wireless controller compatibility: electric air curtain range for small doorways; heating capacities

Nor-Ray-Vac is a versatile gas-fired radiant tube heating system, purpose-built to suit the unique layout and thermal requirements of each building. Its continuous radiant tube design delivers consistent heat distribution across the entire floor area, creating a comfortable environment throughout. For buildings with varied usage, the system can also be configured into distinct heating zones

COOL-FIT 2.0 is a pre-insulated 3-in-1 piping system for chilled water, suitable for use in a variety of buildings and applications. Guaranteed not to corrode or be affected by the formation of condensation. Rapid installation time and high energy-efficiency make this system a prime option for building owners, general contractors and planners as

Guardian Recessed Cased Air Curtains are designed for commercial and retail entrances, helping to maintain indoor climate by creating an air barrier across doorways. Units are available in electric heated, low pressure hot water (LPHW) heated, and ambient models, with widths from 1m to 2m: air curtain range for recessed installation in commercial

ACT Commercial Air Curtains are electric ceiling-mounted heaters designed to direct a downward flow of warm air, delivering immediate heat to indoor spaces. The range includes recessed and surface-mounted models with heating capacities from 3kW to 6kW, finished in white with integrated grilles for a discreet appearance: electric ceiling heater

DeepClean™ floor- and wall-mounted radiators meet the hygiene demands of hospitals and other healthcare environments. With their easy-to-remove guards and BioCote® antimicrobial coating, DeepClean™ low surface temperature radiator systems offer the key benefits of enhanced hygiene and cost savings

Wavin Calefa Heat Interface Units (HIUs) are made for district heating systems in residential buildings, distributing hot water from a central source to individual dwellings. The range includes flexible control options, an auto mode that adapts to usage patterns, and is independently tested to BESA standards for energy efficiency and

The Sorrento electric radiant heating range is robust weatherproof (IP24 rated). The premium versatile heater is also available in a double or triple option and can be grouped together horizontally and vertically, making it suitable for countless applications: robust weatherproof heater (IP24 rated); tungsten-halogen bulbs provide short wave

INSTAFLEX (PB) is a system of polybutene pipes for applications in the building technology and marine sector. Polybutylene was developed specifically for building technology and is the ideal material for drinking water installations. INSTAFLEX offers complete solution package for buildings ranging in size from single-family detached houses through

Hep20 is a flexible, push-fit plumbing system that is suitable for domestic hot and cold water supply, including potable water, as well as central and underfloor heating. The fittings are keyless, meaning no additional equipment or tools required when installing or demounting fittings. Secured using Hep2O’s secure 2 stage twist and push mechanism

Nordair Niche Direct and In-Direct Gas Fired Heater, powered by Reznor, is a custom-built heating and ventilation system for large spaces, delivering heat outputs from 30kW to 4000kW with fully modulating control. Designed for efficient heating, improved air quality, and reduced energy use, it suits commercial and industrial environments requiring

The Aquasystem Polypropylene Random (PP-R) piping system is suitable for both hot and cold water and for heating systems due to the material's high resistance to pressure and temperature. Complete range of PP-R pipes (PN 20, PN 10, Fibre and PP-R ALU); wide range of fittings (socket fusion, threaded, electrofusion, couplers, branch saddles

COOL-FIT ABS Plus is a completely pre-insulated plastic pipe system for secondary cooling and refrigeration systems operated with brine or water diluted glycols. The system is based on proven and cold-shock resistant ABS pipes and fittings, which are insulated with high-quality PUR foam in addition to a robust and UV-resistant outer pipe. The

Tigris M5 press-fit is a multilayer composite pipe system designed for potable water and heating applications. The MLCP press-fit system offers a unique acoustic leak alert function, any loose fittings producing a loud whistling sound to detect leaks quickly and easily. Designed high performance and ease of installation. The system is available in

AB Industrial Air Curtains from Nortek create a strong stream of heated or ambient air across open doorways to help reduce heat loss and improve indoor comfort in large spaces. Designed for use in warehouses and hangars, this range includes models powered by electric, natural gas, or LPHW, with lengths from 1.75m to 2.25m and outputs up to 60kW

e+ Electric Warm Air Unit Heaters are electric-powered heaters designed for industrial and commercial spaces. They provide a gas-free solution for warm air heating. Units are available in 10kW, 20kW, and 30kW outputs, with adaptive control for energy efficiency and dual functionality for heating or air circulation. Suitable for 380/400/415V

Vision Overhead Radiant Single Linear Heaters are high-efficiency radiant tube heaters designed to heat large spaces by directing warmth to specific areas below, reducing energy waste. Available in a range of outputs from 15kW to 50kW, lengths from 7.53m to 15.66m, and suitable for natural gas or propane fuel types: radiant tube heaters for

Colloide designs and installs efficient, low-carbon heat pump systems that are easily adapted to maximise the return from a heat source. The heat pump extracts the energy at the source temperature then raises the temperature to a useable level. A heat exchanger is used to extract the heat from the circuit at this point, with the now cooled medium

Wavin's WarmDeck underfloor heating is a durable and thermally efficient low-profile underfloor heating system, designed specifically for upstairs. 22mm WarmDeck Structural Panel maintains existing floor construction heights and architectural designs. Pre-channeled to accommodate 16mm underfloor heating pipes. The system is laid directly over

DeepClean Extra LST Radiators by Contour are anti-ligature heating solutions made for secure environments where reducing self-harm risk is critical. The range uses a drop-down door for easy cleaning, IP3X-rated grilles with 2mm holes at 4mm centres, and tamper-resistant security locks. Made from 1.5mm or 2mm Zintec or Magnelis steel, with BioCote

DeepClean™ low surface temperature (LST) radiator guards and anti-ligature radiator guards offer robust, hygienic and practical solutions that deliver long-term performance in the most demanding environments. They are ideal for protecting service providers and vulnerable service users. The guards can be retrofitted over existing heat emitters to