Refine by
Channel
Showing best results - all illustrated entries. Change the channel to view specific categories.
Building waste water management
(101)
Building waste water management. Find the best solution for your project here.
Building waste water management - helping you find the best solution for your project.
Wavin Osma waste & traps for managing waste water
OSMA push-fit and solvent weld waste ranges, used alongside the trap, overflow and condensate ranges, can be used to meet all soil system installation requirements. Solvent weld system manufactured in ABS with secure jointing, wide range of fittings (32/40 & 50mm) and black, grey and white colour options. Kitemarked to BS EN 1455-1:2000 Wavin Osma
Perimeter Drainage Channel for floors and walls
Perimeter Drainage Channel can be bedded into a preformed channel at the floor / wall angle and collects water. Holes in the channel walls allow water to ingress to drain away to a sump. Jetting eyes are available to allow maintenance and inspection: it can be supplied with or without a 20mm upstand; drainage Conduit for collection of water at
Stainless steel box drains
Lang+Fulton, in partnership with Gridron, a leading Italian manufacturer of drainage systems, offers stainless steel box drains made to the highest quality. The company provides a full design service or will assist with technical support during the development of a project. Standard sizes are available promptly from stock; custom sizes to order
Wavin solvent waste and traps
Solvent Waste and Traps is a range of waste, trap, overflow, and condensate systems for industrial and commercial plumbing. Connects with Wavin Osma Solvent PVC-U Soil and Wavin AS Acoustic soil systems. Trap system is manufactured in polyethylene. PVC-C solvent weld waste is available for interior and exterior use. Overflow system is manufactured
Wavin Soil & Waste Systems – wastewater drainage for any building type
Wavin Soil and Waste portfolio covers individual domestic connections to complex commercial and industrial drainage stacks, the range is split into two tiers: Osma residential systems for domestic and light commercial applications, and a Commercial range for higher-specification projects where noise control, chemical resistance or enhanced
Wavin HDPE soil waste and vent systems
Wavin HDPE is a fully welded HDPE soil, waste and vent system approved for pipe installation in buildings to DIN 19535 and DIN EN 1519. The product range includes pipes and fittings with dimensions between 40mm and 315mm. System componenet provide a high strength, durability and chemical resistance in combination with a high flexibility level
Stainless steel fissure drainage channel
Lang+Fulton, in partnership with Gridron, a leading Italian manufacturer of drainage systems, offers stainless steel fissure drainage channels made to the highest quality. The company provides a full design service or will assist with technical support during the development of a project. Standard sizes are available promptly from stock; custom
Yellow Channel for drainage in below ground applications
Yellow Channel is a water collection conduit designed to control water ingress in below ground applications. It makes a drained cavity system easily maintainable. With new concrete structures, there is a risk of excess free lime leaching out from the concrete as groundwater passes through the new structure, through joints, cracks and dry pack, in- PRODUCT
Delta Membrane Systems
AS+ acoustic soil and waste pipes for low noise drainage
Wavin AS+ drainage pipes are designed to reduce noise levels in soil and waste systems in commercial, educational and residential buildings. Optimal noise reduction is achieved by the high mass and wall thickness of the pipes, together with the low elastic-modulus of the flexible PP material and specially designed brackets
Osma Soil and Vent - PVC-U soil drainage discharge system
Wavin Osma Soil and Vent soil drainage system for domestic and commercial use is made from at least 50% recycled PVC in 110mm and 160mm pipes. Connection options include push-fit and solvent weld, with fittings in black, grey and white, and sizes of 82, 110 and 160mm
Soil & waste drainage pipe solution, Amphia Hospital, Netherlands
Prefabricated construction – whether an entire building, home or plumbing pipe system – is beginning to increase in popularity and use. Modularity, speed of installation, cost savings, and sustainability are just some of the key benefits that are attracting customers and developers to prefab solutions. So when Unica, the installer on the new
Towerblock soil vent pipe installations, London
St George Beaufont Park is a new community and residential development in North West London, created by Berkeley Group. This mixed use development comprises of both commercial and industrial units as well as offices, kitchens and a full basement plan. There are also 343 residential properties comprised of one-bed, two-bed and three-bed apartments
Geberit HDPE pipes are used for all types of drainage including above ground, below ground and chemical waste applications. They are made from HDPE – high density polyethylene - which is tempered, eliminating tensions caused by manufacturing as well as subsequent dimensional changes. Sizes range from 32mm to 315mm in diameter
ACO Pipe® stainless steel pipework systems offer an alternative to traditional PVC-u and cast iron soil and waste pipes for above and below ground applications. They have a socketed connection system that contributes to a significant reduction in installation time and minimises long term maintenance and care costs. Manufactured from austenitic- PRODUCT
- ACO Building Drainage Ltd
The BLÜCHER light duty 114.300.050 is an adjustable drain for concrete/tiled floors, with a horizontal 50mm outlet. It is a low-profile drain without a membrane flange. The upper part of the outlet is height-adjustable, can be rotated 360° and tilted at 10° to the lower part. Material: Stainless steel grade AISI 304 or AISI 316L. Sealing ring
The Industrial 200 is a circular stainless steel floor drain suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for flexible sheet floor finishes and is supplied without a membrane flange. A horizontal 110mm push fit spigot outlet is included. The
The AS701 stainless steel upstand channel drain is available in 304 and 316 grade stainless steel. It is ideally suited for areas where wall tanking is required, such as public shower areas, and it can be integrated with tiled walls. The AS701 stainless steel upstand channel drain is designed for use as part of a bespoke drainage solution- PRODUCT
- ACO Building Drainage Ltd
This circular stainless steel floor drain is suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for resin or epoxy coated floors. The drain has a vertical 110mm push-fit spigot outlet and can be supplied with a removable water trap and either a sand
The Industrial 200 is a square-topped stainless steel floor drain suitable for use in commercial applications including kitchens, plant rooms, food production facilities and pharmaceutical buildings. It is suitable for tiled or concrete floor finishes. A vertical 110mm push fit spigot outlet is included. The drain can also be supplied with a
Industrial-grade 760.503.110 round-topped stainless steel floor drains are designed for use with resin or concrete floors. They are suitable for commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A vertical 110mm push-fit spigot outlet is included as standard. The drains can be
The AS201 mechanical clamp drainage channel is made from 304 or 316 grade stainless steel and is designed to be used as part of a bespoke drainage solution. The AS201 mechanical clamp drainage channel clamps most flexible floor materials (up to 8mm thick) and is typically used where ACO Vinyl Seal is not appropriate, for example, when a flexible- PRODUCT
- ACO Building Drainage Ltd
The BLÜCHER Sealed Rodding Eye is a nominally 150mm square outlet drain with a screw-locked removable cover. It has a vertical 110mm diameter outlet, and is used for concrete or tiled floors. The drain has a tight-sealing blank plate. The blank-plate can be removed for cleaning and allowing wastewater removal. A removable water trap cannot be used
Light-duty 260.300.110 stainless steel drains are designed for flexible sheet flooring. They have a 110mm vertical outlet. The clamping ring is 155mm in diameter and is secured to the drain with six flexible sheet flooring bolts. Standard gratings are 155mm in diameter and 1mm thick, with a bright-annealed surface. They are secured to the clamping
Industrial-grade 763.403.110 square-topped stainless steel floor drains are designed for tiled or concrete floors. They are suitable for use in commercial applications, including kitchens, plant rooms, food production facilities and pharmaceutical buildings. A horizontal 110mm push-fit spigot outlet is included as standard. The drains can be
