Boilers & burners

For over twelve years, Telford has manufactured a range of thermal stores under the Tristar and Tristor brand names. The range started with three different models: combination, open vented and sealed system. These were designed for boiler applications and fully electric heat sources. Telford now offers over 100 models, and can also provide bespoke

RL/B MZ series two-stage light oil burners are characterised by a modular monoblock structure, meaning all necessary components can be combined in one unit thereby making installation easier, quicker and more flexible. The series covers a firing range of 1250-4450kW, and is designed for use in hot water boilers, overheated water boilers, and steam

RS 300-800/M BLU series low NOx modulating gas burners are characterised by a monoblock structure, meaning all necessary components are combined in a single unit, making installation easier and quicker. The burner covers a firing range of 1000-5169kW, and is designed for use in hot water boilers or industrial steam generators. Operation can either

The J Series is designed to meet the steam raising requirements for process steam across industrial, pharmaceutical, medical, food and drinks industry applications. Its tubeless design, invented by Fulton, eliminates coils and tubes traditionally used in steam raising plant and enables the J Series to raise its full steam output in just 20

Allards International Ltd provides thermal design engineering for heat exchanger technology. For over 10 years, the company has completed the design and engineering for different types of heat exchangers. Products include shell and tube heat exchangers (as per TEMA), fully welded plate heat exchangers, plate and frame heat exchangers, and

BigBlock compact brazed heat exchangers (CBEs) are suitable for high-capacity applications, including flexible and reversible chillers, industrial heat pumps, and process cooling systems. The efficient B439 is designed for high heat transfer. It has two plate types, which can also be used together, suitable for a wide range of heating, cooling

The Riello 40 GS10/D is part of a series of two-stage gas burners designed for residential heating. It offers a heat ouput of 29/41-106kW. In developing these burners, Riello paid special attention to reducing noise, as well as ease of installation and adjustment. All models meet the requirements of EN 676 and LRV 92, and conform to BlmSchV 1996

Blowdown vessels are designed to reduce the pressure of the blowdown discharge from the boiler to atmospheric pressure, and also reduces the blowdown discharge to drain to acceptable temperatures for compliance to water bylaws. The blowdown vent can be capped with a blower exhaust head, which incorporates a condensation drain eleven models: 16 to

Yorkshireman 2 Steam Boiler Range The most energy efficient steam boiler available in the UK Developed with rising fuel costs in mind, the multi award-winning Yorkshireman2 Boiler is the best option for the truly energy conscious. Incorporating a number of energy saving features including our patented X-ID tubes, the Yorkshireman2 boiler could

Water treatment should be implemented as part of the boiler system design to prolong the life of the boiler. The most common form of water pre-treatment is water softening. The water softeners remove the hardness from the water, and replaces them with non-hardness forming sodium salts. The Fulton Duplex range of water softeners is fully

For any CleanSteam enquiries, please contact Fulton sales department on +44 1179 723322 or email [email protected]

Floor-standing, indirect unvented twin coil calorifiers are available in 130-305L capacities for domestic and residential applications, and 400-100,000L capacities for commercial applications. They have ergonomically designed stainless steel tanks that are pressure tested to 15 bar with a grey plastosol outer case finish as standard. All the

The Fulton FT-C thermal fluid heater features a compact fuel fired 4-pass heater design that is capable of operating temperatures of up to 345°C. It is designed to allow for high fluid velocities and low film temperatures, which translates into system longevity. It is highly efficient and its ability to be skid-mounted means minimal floor space is

Domestic vented water cylinders are available in indirect, direct and single feed versions. Indirect cylinders are designed to be linked to a remote heat source, such as a gas boiler or coal fire. The water within the central heating system is heated by the remote heat source and is passed through the coil in the cylinder. As the primary normally

The EFS (Electric Flash Steam) is a fully automatic, self-contained steam boiler which incorporates an integrated feed water tank and feed water pump. It is able to meet fluctuations in steam loads and meets the short-term peak flow rates of a typical steriliser cycle. The boiler is designed to reduce entrainment of water droplets to a minimum

The Fulton VMP (vertical multiport boiler) incorporate a series of heavy-walled large-diameter schedule 80 flue pipes welded to the top and bottom heads in the pressure vessel; these pipes are surrounded by water. The water-backed design speeds up boiler start up time and creates overall even heating throughout. The Fulton VMP steam boilers have a

The PRESS TG series three-stage light oil burners covers a firing range of 830-5340kW. Available in 8 different models, these burners are especially well suited for matching with pressurised chamber boilers. Applications include large civil plants for domestic heating, or industrial where thermal load is repetitive and predictable. A hydraulic ram

HWS packaged plate heat exchanger instant hot water systems are designed to heat domestic hot water using a low temperature hot water. The standard models are available with outputs from 50 to 2000kW for heating domestic hot water from 10 to 65°C using low temperature hot water at 82°C. Each unit features a gasketed plate heat exchanger with AIS

Maxistore cylinders come in Direct models with 2 Immersion heaters, suitable for electric only applications, perfect for retro fit situations this cylinder can even come in bespoke designs. Manufactured in the United Kingdom to a very high standard, we have 30 years of experience within the hot water cylinder industry

The RS two-stage progressive gas burners series covers a firing range of 81-2290kW. It is designed for use in hot or superheater water boilers, hot air or steam generators, diathermic oil boilers. Burners are fitted with a microprocessor control panel which gives an indication of operation and diagnosis of fault cause. Optimisation of sound

Gasketed plate boiler separation heat exchangers have AIS 316 stainless steel plates. They are suitable for heating cooling and process applications. Standard models are suitable for outputs from 5-5000kW with working pressures to 6 Bar. Higher pressure units and tailored outputs are available to suit precise requirements. Bespoke insulation