Type Illuminated escape route signs
Features Maintained
Non-maintained
Installation Ceiling mounted
Wall mounted
Light source Fluorescent tubular
IP rating IP67
 
 

Ex de emergency exit lighting is classified for use in hazardous areas with classification 1, 21, 2, 22. It has ingress protection of IP67 and IP6X to EN60529:1992.

• Electrical specification
Control gear: high frequency electronic ballast complying with all European standards relating to safety, operation and EMC (Immunity).
Operating voltage: 220-254 Volts 50/60Hz.
Operating current: maximum 0.5 Amps.
Power factor: 0.98.
Emergency operation: maintained or non-maintained.
Emergency operating time: 3 hours in both modes.
Ballast lumen factor: 27%.
Recharge time: 24 hours from fully discharged state.
Protection against deep discharge and reverse battery polarity
Terminals: 2.5mm2 connection block. Suitable for through wiring.
Lamps: bi-pin fluorescent tube, T5.
EMC: to EN55015:2000.
A set of 3 pictograms is supplied as standard.

• Enclosure specification
All cast parts: light metal alloy.
Overtube: borosilicate glass/polycarbonate.
Reflector: 1.2mm galvanised mild steel.
Finish: cast metal parts are epoxy powder coated to RAL7032.
Reflector: epoxy powder coated, white.
Cover fixing: M6 allen head stainless steel screws.
Gasket: Nitrile O ring.
Earthing: internal.
Mounting: 2 x stainless steel removable mounting brackets supplied as standard.

• Entry specification
1 x 20mm Ex d threaded hole fitted with Ex d stopping plug.


Ex de emergency exit lighting is classified for use in hazardous areas with classification 1, 21, 2, 22. It has ingress protection of IP67 and IP6X to EN60529:1992.

• Electrical specification
Control gear: high frequency electronic ballast complying with all European standards relating to safety, operation and EMC (Immunity).
Operating voltage: 220-254 Volts 50/60Hz.
Operating current: maximum 0.5 Amps.
Power factor: 0.98.
Emergency operation: maintained or non-maintained.
Emergency operating time: 3 hours in both modes.
Ballast lumen factor: 27%.
Recharge time: 24 hours from fully discharged state.
Protection against deep discharge and reverse battery polarity
Terminals: 2.5mm2 connection block. Suitable for through wiring.
Lamps: bi-pin fluorescent tube, T5.
EMC: to EN55015:2000.
A set of 3 pictograms is supplied as standard.

• Enclosure specification
All cast parts: light metal alloy.
Overtube: borosilicate glass/polycarbonate.
Reflector: 1.2mm galvanised mild steel.
Finish: cast metal parts are epoxy powder coated to RAL7032.
Reflector: epoxy powder coated, white.
Cover fixing: M6 allen head stainless steel screws.
Gasket: Nitrile O ring.
Earthing: internal.
Mounting: 2 x stainless steel removable mounting brackets supplied as standard.

• Entry specification
1 x 20mm Ex d threaded hole fitted with Ex d stopping plug.


Emergency lighting - all companies