Suitability Central heating systems
Chilled water systems
Installation Wall mounted
Number of pumps Single
Twin
Max. system content (litres) 4.5
Min. system operating pressure (bar) 0.7
Max. system operating pressure (bar) 6
Dimensions (w x d x h) 350x200x300mm
 
 

Compact, wall-mounted pressurisation unit housing one or two small pressurisation pumps and associated control equipment for connecting to small heating or cooling installations.

Suitable for large domestic dwellings or small commercial / industrial installations.

A sealed system offers a number of advantages, such as the elimination of corrosion due to the lack of contact between air / water within the system. There is also no requirement for a large expansion tank within the roof space of the building, and a positive pressure is maintained on system "cold fill" pressure.

All equipment is mounted in a white powder-coated casing with a flush-mounted gauge on the face of the unit to indicate system pressure.

Within the cabinet is a small make-up tank with its own filling valve assembly (complying with the Water Regulations Guide), a small hydraulic pump capable of producing a pressure between 0.7 to 2.4 bar, a pressure control switch, control circuit fuse, terminals and all necessary wiring to achieve the correct operation.

Suitable connections are provided to allow system make-up, tank overflow and connection to the system pipework as well as electrical terminals for connecting the single phase, live, neutral and earth supply.


Compact, wall-mounted pressurisation unit housing one or two small pressurisation pumps and associated control equipment for connecting to small heating or cooling installations.

Suitable for large domestic dwellings or small commercial / industrial installations.

A sealed system offers a number of advantages, such as the elimination of corrosion due to the lack of contact between air / water within the system. There is also no requirement for a large expansion tank within the roof space of the building, and a positive pressure is maintained on system "cold fill" pressure.

All equipment is mounted in a white powder-coated casing with a flush-mounted gauge on the face of the unit to indicate system pressure.

Within the cabinet is a small make-up tank with its own filling valve assembly (complying with the Water Regulations Guide), a small hydraulic pump capable of producing a pressure between 0.7 to 2.4 bar, a pressure control switch, control circuit fuse, terminals and all necessary wiring to achieve the correct operation.

Suitable connections are provided to allow system make-up, tank overflow and connection to the system pipework as well as electrical terminals for connecting the single phase, live, neutral and earth supply.


Pressurisation units - products from other companies

Pressurisation units - all companies