Plate heat exchangers
|Media to be heated||
|Heat load (kW)||
|Maximum pressure (bar)||
|Maximum temperature (deg. C)||
|Dimensions (w x d x h)||
from 250x567x1110mm to 330x707x1165
from 140 to 160
The Stokvis Econoplate E2(****) Series are water-to-water, packaged plate heat exchangers that provide instant hot water.
The Econoplate E2(****) Series are available in 3 ranges with outputs up to approximately 1100kW dependent upon application.
The E2(****) series are designed to operate up to a maximum temperature of 140°C** (see Primary Installation), to provide hot water in conjunction with a buffer vessel, or to provide heating instantaneously up to their maximum rated output. Econoplate units can be coupled to multiple buffer vessels for even greater outputs of hot water.
All units are built around an epoxy coated chassis containing the heat exchanger. This heat exchanger is made up of a number of gasketed stainless steel plates which form the channels for primary and secondary water to flow through. Plates can be readily added, up to the chassis limit, enabling the output capacity of an existing unit to be increased if required.