AEL has developed a free tool to help specifiers when it comes to selecting the right system and getting an instant quotation for that system.

Before using a plate heat exchanger sizing calculator the principle that heat will always leave the warmer fluid and that heat energy will be transferred to the colder fluid must be understood.

With a plate type heat exchanger, the heat will instantaneously pass through the plates that separates the hot and cold fluid heating up the colder fluid.

Heat will always be transferred from a hot medium to a cold medium and there must always be a temperature difference between the fluids. The heat lost by the hot fluid will be equal to the amount of heat gained by the cold fluid except for standing thermal losses that are usually minimal.

AEL have already standardised a large selection of heat exchanger duties and created tailored calculators:

  • Domestic Hot Water (DHW) Plate Heat Exchanger sizing calculator
  • Central Heating System Break Plate Heat Exchanger sizing calculator
  • Swimming Pool Plate Heat Exchanger sizing calculator
  • Underfloor Heating Plate Heat Exchanger sizing calculator
  • Wall Mounted Substations Plate Heat Exchanger sizing calculator

How to use the AEL plate heat exchanger sizing calculator:

  • All that you need to do is to plate heat exchangers page on our site and go to the filter index on the left hand side and select the type of installation you are working on.
  • Once you have selected the type of installation you are working on you then “choose the type of Heat Exchanger” you would prefer to use.
  • When you have selected your preferred type of heat Exchanger you then only need to “type in the KW power” available or required.
  • When the KW power required has been selected the page will automatically refresh and re calculate the technical duty information and price on the page for you to use for your specification or to purchase.

NOTE: Altering the KW required will change the duties for each type of installation shown in the filter apart from the “Swimming Pool” heat exchangers where the pool volume is changed instead of the KW.

Complete the enquiry form opposite if you have a technical question.


AEL has developed a free tool to help specifiers when it comes to selecting the right system and getting an instant quotation for that system.

Before using a plate heat exchanger sizing calculator the principle that heat will always leave the warmer fluid and that heat energy will be transferred to the colder fluid must be understood.

With a plate type heat exchanger, the heat will instantaneously pass through the plates that separates the hot and cold fluid heating up the colder fluid.

Heat will always be transferred from a hot medium to a cold medium and there must always be a temperature difference between the fluids. The heat lost by the hot fluid will be equal to the amount of heat gained by the cold fluid except for standing thermal losses that are usually minimal.

AEL have already standardised a large selection of heat exchanger duties and created tailored calculators:

  • Domestic Hot Water (DHW) Plate Heat Exchanger sizing calculator
  • Central Heating System Break Plate Heat Exchanger sizing calculator
  • Swimming Pool Plate Heat Exchanger sizing calculator
  • Underfloor Heating Plate Heat Exchanger sizing calculator
  • Wall Mounted Substations Plate Heat Exchanger sizing calculator

How to use the AEL plate heat exchanger sizing calculator:

  • All that you need to do is to plate heat exchangers page on our site and go to the filter index on the left hand side and select the type of installation you are working on.
  • Once you have selected the type of installation you are working on you then “choose the type of Heat Exchanger” you would prefer to use.
  • When you have selected your preferred type of heat Exchanger you then only need to “type in the KW power” available or required.
  • When the KW power required has been selected the page will automatically refresh and re calculate the technical duty information and price on the page for you to use for your specification or to purchase.

NOTE: Altering the KW required will change the duties for each type of installation shown in the filter apart from the “Swimming Pool” heat exchangers where the pool volume is changed instead of the KW.

Complete the enquiry form opposite if you have a technical question.


Interested in this news?
Call 01928 579068
OR
 
 
 
Enquire
 


Also by AEL Heating Solutions Ltd

AEL Heating Solutions Ltd address and contact details

AEL Heating Solutions Ltd
4 Berkeley Court
Manor Park
Runcorn
WA7 1TQ
Tel: 01928 579068
Fax: 01928 579523
View on map
 
 

Ask AEL Heating Solutions Ltd about

New plate heat exchanger sizing calculator