Type Multiservice chilled beams
Operation Active
Main functions Cooling
Heating
Additional functions Fire sprinklers
Lighting
Public address
Smoke detection
Installation Suspended
Cooling capacity (W/m2) up to 1000
Unit dimensions (l x w x d) 4500–5200 (l) x 750 (w) x 291mm (h) + services
 
 
 

Smart Beam is a multi-service active chilled beam with 2-way air discharge and horizontal heat exchanger.

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for freely suspended installation.

Application

  • Active chilled beams of Type DID-SB (SMART BEAM) for freely suspended installation, preferably for room heights up to 4.00m
  • Project-specific integration of functions or services such as lighting, loudspeakers, sprinklers, smoke detectors, or PIR sensors
  • Integral strip light fittings use innovative microprism optics to provide uniform illumination of rooms
  • Each section can be individually designed
  • 2- or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
  • Energy-efficient solution since water is used for heating and cooling

Special characteristics

  • Freely suspended active chilled beam with choice of different face plate perforations
  • Heat exchanger as 2- or 4-pipe system
  • Wide range of additional services such as lighting, sprinklers, loudspeakers and sensors (accessories)
  • Water connections at the narrow side, Ø12 mm Cu pipe, with plain tails or with G½" external thread, or with a G½" union nut; with flat seal

Wall end

  • Cover for air and water connections at the end facing the wall
  • Connection of project-specific services

Active section

  • Air discharge and heat exchanger
  • Integration of different functions, eg acoustic fleece, lighting or sensors

Front end

  • Available in three designs
  • Integration of project-specific functions, eg loudspeakers

Nominal sizes

  • 3000mm

Optional equipment and accessories

  • Control system
  • 3 different front ends
  • Various services, eg lighting, sprinklers, smoke detectors, PIR sensors, and loudspeakers
  • Powder coating in a range of different colours, eg RAL CLASSIC


Smart Beam is a multi-service active chilled beam with 2-way air discharge and horizontal heat exchanger.

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for freely suspended installation.

Application

  • Active chilled beams of Type DID-SB (SMART BEAM) for freely suspended installation, preferably for room heights up to 4.00m
  • Project-specific integration of functions or services such as lighting, loudspeakers, sprinklers, smoke detectors, or PIR sensors
  • Integral strip light fittings use innovative microprism optics to provide uniform illumination of rooms
  • Each section can be individually designed
  • 2- or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
  • Energy-efficient solution since water is used for heating and cooling

Special characteristics

  • Freely suspended active chilled beam with choice of different face plate perforations
  • Heat exchanger as 2- or 4-pipe system
  • Wide range of additional services such as lighting, sprinklers, loudspeakers and sensors (accessories)
  • Water connections at the narrow side, Ø12 mm Cu pipe, with plain tails or with G½" external thread, or with a G½" union nut; with flat seal

Wall end

  • Cover for air and water connections at the end facing the wall
  • Connection of project-specific services

Active section

  • Air discharge and heat exchanger
  • Integration of different functions, eg acoustic fleece, lighting or sensors

Front end

  • Available in three designs
  • Integration of project-specific functions, eg loudspeakers

Nominal sizes

  • 3000mm

Optional equipment and accessories

  • Control system
  • 3 different front ends
  • Various services, eg lighting, sprinklers, smoke detectors, PIR sensors, and loudspeakers
  • Powder coating in a range of different colours, eg RAL CLASSIC


Interested in this product?
Call 01842 754545
OR
 
 
 
Downloads
 
 
 
Enquire
 


Also by TROX UK

TROX UK address and contact details

TROX UK Ltd
Caxton Way
Thetford
IP24 3SQ
Tel: 01842 754545
Fax: 01842 763051
View on map - 2 addresses
 
Follow TROX UK
 
Not found what you're looking for? View other options

Ask TROX UK about

Smart Beam active chilled beam for heating and cooling