The MAXXConnect™ family is a range of products specifically designed for the pump industry. The pump stations will warn when a problem arises in a basement environment.
The range comprises:
An innovative, independent high level alarm powered by 240V with a 6V battery backup in case of power failure. In its basic format it is easy to install, requiring just two fixings and connection of mains power and float switch.
Status for All OK, high water alarm, previous cancelled alarms, mains failure and service required are clearly displayed via a simple LED language. Volt free contacts are included as standard where connectivity to building management systems is required.
PowerMAXX is specifically designed for pump applications. It can run 2 x V3 ground water pumps without mains power for up to 4 days depending on number of cycles/hr, sits in standby mode for over three weeks and is virtually inaudible.
One or two pumps are directly fed through PowerMAXX™. If power failure occurs, the pumps automatically take power from PowerMAXX™ which will have been fully charged during mains operation. PowerMAXX™ will automatically recharge when mains power returns.
Installation is simple, PowerMAXX™ is free standing and can be installed in any dry ventilated area. As this unit is fitted in the power line, no additional electrical spurs are required.
MessageMAXX™ is combined with the AlertMAXX™ to give remote monitoring when clients are away from their property. Messages are sent to predetermined phone numbers using GSM technology and are received in text format.
Installation is simple requiring just two fixings and connection to the AlertMAXX™ via one cable, no external power is required and back up in case of mains failure comes from the battery fitted in the AlertMAXX™.
Status for All OK, high water alarm, previous cancelled alarms, mains failure and service required are clearly displayed via a simple LED language and mimics the AlertMAXX™.