1-15 of 41

BUILDING SERVICES

   Stirling, FK9 4NF   View on map
Call 01786 447005   Visit website
  • Introduction to ventilation louvres
    Ventilation louvres provide external weather protection to supply and exhaust duct openings. They are typically used in large commercial or industrial buildings where there is a need for a constant supply of air. Fixed...
  • Introduction to floor drain outlets
    Floor drain outlets are typically made from grade 304 or 316 stainless steel or aluminium. They are suitable for surface drainage in commercial kitchens, and industrial food production, pharmaceuticals production and plant...
  • Introduction to packaged plant rooms
    Packaged plant rooms are self-contained prefabricated enclosures that house HVAC, power or communications equipment in a single centralised facility. Mechanical and electrical services are integrated into a single...
  • Introduction to pumping stations
    Packaged pumping stations are installed where the gravity drainage of surface water, wastewater or sewage is not possible. They 'lift' the liquid concerned to the requisite height, either into the drains or a septic tank.
  • Introduction to roof ventilation turrets
    Roof ventilation turrets use external wind and temperature to improve indoor air quality (IAQ) as part of a sustainable ventilation system. Unlike mechanical ventilation systems, natural ventilation uses a minimal amount of...
  • Introduction to heat exchangers
    Heat exchangers facilitate the transfer of heat from one medium to another, and in the building environment they are typically used in services such as heating, refrigeration / cooling and air conditioning. In process...
  • Introduction to chilled beams and ceilings
    Chilled beams and ceilings are a type of convection HVAC system suitable for use in large buildings. They can provide both heating and cooling. Passive chilled beams rely solely on convection, while the active type , also...
  • Introduction to fabric ducting
    Fabric / textile ducting is an alternative to traditional steel or aluminium ductwork. Fabric ducting was developed as a draught-free air distribution system. It suits applications with a hygiene requirement, such as...
  • Introduction to chillers
    Chillers are compressor-based cooling systems that are similar to air conditioners except that they cool and control the temperature of a liquid instead of air. Precision air conditioning chillers enable close control of...
  • Introduction to ventilation fans
    Ventilation fans are designed for air supply, air extract or air supply and extract functions. Models are available for a host of applications in the residential, commercial (including IT and telecomms), and industrial...
  • Introduction to radiators
    Radiators work as part of central heating or local room heating systems. Different heat outputs, wattages and IP ratings suit them to particular applications in domestic, commercial and public buildings. Sculptural radiators...
  • Introduction to electrical measurement
    Electrical measurement devices are used to calculate the electrical parameters of a system. Different devices suit different requirements: hand-held electrical testers to check for earth loops and other electrical faults...
  • Introduction to mechanical ventilation units
    Mechanical ventilation systems are installed in new build and refurbished houses and flats where natural ventilation is insufficient to supply fresh air, and remove indoor pollutants and excess moisture. The most energy...
  • Introduction to smoke / fire / air vents
    Smoke, fire and air vents are used for the extraction and ventilation of air or smoke from a building. They are often referred to as automatic opening ventilators (AOVs). During a fire, they open to vent smoke out of the...
  • Introduction to solar energy
    Products that collect, convert and store solar energy form a large part of the renewables sector. Systems have been developed to suit applications from large-scale solar farms to domestic microrenewables projects.