1-10 of 10

AEL Heating Solutions Ltd

   Runcorn, WA7 1TQ View on map
Call 01928 579068   Visit website
  • Single or two pipe central heating system
    AEL Heating Solutions Ltd
    Single pipe central heating system A single pipe central heating system operates through a main single feed hot water supply pipe which comes from the boiler supplying hot water to each radiator. Each radiator has a smaller hot...
    SAVE Article
  • Trench Heating Frequently Asked Questions
    AEL Heating Solutions Ltd
    What is the recommended distance away from a floor level full fronted window that a trench heater should be installed? The recommended distance between an AEL trench heater and a full faced window is usually between 20cm to 30...
    SAVE Article
  • AEL cast iron radiators – FAQ
    AEL Heating Solutions Ltd
    Q What are the advantages of using cast iron radiators? A Cast Iron radiators retain their heat and therefore emit heat for longer periods into your room unlike a modern pressed steel radiator. Cast iron radiators are also...
    SAVE Article
  • How to calculate the "delta T" for a radiator
    AEL Heating Solutions Ltd
    After you have worked out the heat requirement for your room (AEL's easy-to-use BTU calculator will help you do this), how can you check that the radiator you have chosen will provide enough heat output? There is a simple...
    SAVE Article
  • Heating outputs: what is a BTU and what is a watt?
    AEL Heating Solutions Ltd
    When discussing the heat output required for a room, It can be confusing when one engineer works with BTU’s and another works with watts. So what is a BTU and what is a watt? BTU and watt are both used to measure the heating...
    SAVE Article
  • What is a solar heating system 'heat dump'
    AEL Heating Solutions Ltd
    A Solar Heating System “Heat Dump” is a thermally conductive central heating heat exchanger such as a FARAL Aluminium radiator that will quickly absorb and disperse high temperature heat away from a Solar Heating System. A...
    SAVE Article
  • What is 'Delta P' in a heating system
    AEL Heating Solutions Ltd
    The Delta P is the pressure drop in a heating system which can be defined as the difference in total pressure between two points (e.g A and B) of a fluid carried through the pipework or heating equipment such as a radiator as...
    SAVE Article
  • What are 'Shell and Tube' heat exchangers
    AEL Heating Solutions Ltd
    Shell and tube heat exchangers are considered one of the most effective types of heat exchanger available in the UK. A shell and tube heat exchanger has a cylindrical shell with a tube bundle in the centre. The high thermally...
    SAVE Article
  • Plate Heat Exchangers Designs & Applicatiions
    AEL Heating Solutions Ltd
    Plate Heat Exchangers are generally available as either Brazed, Shell and Tube sealed units or as a Plate and Gasket type that can be opened for servicing or to alter the number of plates. Plate Heat Exchangers provide an...
    SAVE Article
  • The advantages of using a plate heat exchanger
    AEL Heating Solutions Ltd
    Plate Heat Exchangers are used to either heat up or cool down many different types of fluid. When heating up a fluid such as water the Primary heat source from a boiler or waste water heat recovery system will transfer the heat...
    SAVE Article